AutoCodes – Acura – P2627 Acura

P2627 Acura Code - Air/Fuel Ratio Sensor Bank 1 Sensor 1 Circuit Low Voltage

Quick Answer

The front air/fuel ratio (A/F) sensor (bank 1, sensor 1) is installed in the exhaust manifold and detects oxygen content in the exhaust gas. Common causes include Faulty Air/Fuel Ratio Sensor Bank 1 Sensor 1, Air/Fuel Ratio Sensor Bank 1 Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor Bank 1 Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2627 Acura indicates Air/Fuel Ratio Sensor Bank 1 Sensor 1 Circuit Low Voltage.
Common causes: Common causes include Faulty Air/Fuel Ratio Sensor Bank 1 Sensor 1, Air/Fuel Ratio Sensor Bank 1 Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor Bank 1 Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,923

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 22, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2627 Acura Description

The front air/fuel ratio (A/F) sensor (bank 1, sensor 1) is installed in the exhaust manifold and detects oxygen content in the exhaust gas. The front A/F sensor transmits output voltage to the Powertrain Control Module (PCM). The PCM controls fuel injection duration by comparing the target air/fuel ratio with the front A/F sensor signal. The sensor includes the VS cell, the pump cell, the atmospheric reference cavity, the diffusion layer, and the heater, and it enables overall feedback control. The front A/F sensor (bank 1, sensor 1) has a built-in LABEL resistance to regulate the differences of the sensor characteristics. The PCM reads the resistance to regulate the difference properly. If the LABEL resistance (VLBLB 2 signal voltage) is a set value or more, the PCM detects a malfunction and stores a DTC.

OBDII Code P2627 Acura - Air/Fuel Ratio Sensor Bank 1 Sensor 1 Circuit Low Voltage - AutoCodes.com — P2627 Acura Code - Air/Fuel Ratio Sensor Bank 1 Sensor 1 Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P2627 Acura?

Faulty Air/Fuel Ratio Sensor Bank 1 Sensor 1
Air/Fuel Ratio Sensor Bank 1 Sensor 1 harness is open or shorted
Air/Fuel Ratio Sensor Bank 1 Sensor 1 circuit poor electrical connection

How to Fix the DTC P2627 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2627 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2627 Acura code?

Need more information on how to fix the P2627 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2627 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2627 Acura Code

1. What does the OBDII code P2627 mean on an Acura?

P2627 indicates a problem with the Air/Fuel Ratio Sensor Bank 1 Sensor 1 circuit, specifically a low voltage signal, suggesting the sensor may not be functioning correctly.

2. What are the common symptoms of a P2627 code on an Acura?

Symptoms include decreased fuel efficiency, rough idling, reduced engine performance, possible hesitation during acceleration, and an illuminated check engine light.

3. What causes the P2627 code to appear on an Acura?

Common causes include a faulty air/fuel ratio sensor, damaged or corroded wiring, a loose or damaged sensor connector, or issues with the engine control module (ECM).

4. Which sensor is affected by the P2627 code on an Acura?

The code refers to the air/fuel ratio sensor on Bank 1, Sensor 1, which is located upstream (before the catalytic converter) on the side of the engine with cylinder 1.

5. Can I drive my Acura with a P2627 code?

While the car may still be drivable, itâ€™s not recommended as the issue can lead to poor fuel economy, increased emissions, and potential damage to other components like the catalytic converter.

6. How can I diagnose the P2627 code on my Acura?

Start by inspecting the wiring and connectors for the air/fuel ratio sensor for damage or corrosion. Use a multimeter to check voltage signals and confirm sensor functionality. Further testing may require a scan tool to monitor live data.

7. How do you fix a P2627 code on an Acura?

Repairs may involve replacing the air/fuel ratio sensor, repairing or replacing damaged wiring or connectors, or in rare cases, reprogramming or replacing the ECM.

8. What tools are needed to fix or diagnose a P2627 code?

Youâ€™ll need an OBDII scan tool, a multimeter, and basic hand tools to inspect and replace the sensor or repair wiring.

9. How much does it cost to fix the P2627 code on an Acura?

The repair cost can range from $100â€“$400, depending on whether the issue is a simple wiring repair or requires replacing the air/fuel ratio sensor.

10. Can a dirty air filter cause the P2627 code on an Acura?

While unlikely, a severely clogged air filter can affect air/fuel mixture readings, but the P2627 code is more directly related to the air/fuel ratio sensor or its circuit.