AutoCodes – Hyundai – P2626 Hyundai

P2626 Hyundai Code - HO2S Pumping Current Trim Circuit/Open Bank 1 Sensor 1

Quick Answer

The linear O2 sensor is mounted on the front side of the Catalytic Converter (warm-up catalytic converter) or in the front exhaust pipe. Common causes include Faulty HO2S Bank 1 Sensor 1, HO2S Bank 1 Sensor 1 harness is open or shorted, HO2S Bank 1 Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2626 Hyundai indicates HO2S Pumping Current Trim Circuit/Open Bank 1 Sensor 1.
Common causes: Common causes include Faulty HO2S Bank 1 Sensor 1, HO2S Bank 1 Sensor 1 harness is open or shorted, HO2S Bank 1 Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 52,218

How popular is this code, among other codes? Medium

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 27, 2021

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2626 Hyundai Description

The linear O2 sensor is mounted on the front side of the Catalytic Converter (warm-up catalytic converter) or in the front exhaust pipe. It detects a wide range of air/fuel ratios in the exhaust gas from the rich to lean regions. This linear O2 sensor produces a current that corresponds to a specific air/fuel ratio. The Powertrain Control Module (PCM) monitors this signal and determines whether the air/fuel mixture is rich or lean. The PCM constantly monitors the linear O2 sensor and increases or decreases the fuel injection duration using this signal. This is called closed-loop fuel control operation. The PCM monitors front HO2S tip temperature and signal at the same time to check the open circuit of the Pumping Current Trim Circuit. The PCM sets DTC P2626 if front O2 tip temperature is lower than the predetermined threshold and if front HO2S signal after oscillator off is lower than the predetermined threshold.
If the same error code is set in the next driving cycle, the PCM illuminates the MIL.

OBDII Code P2626 Hyundai - HO2S Pumping Current Trim Circuit/Open Bank 1 Sensor 1 - AutoCodes.com — P2626 Hyundai Code - HO2S Pumping Current Trim Circuit/Open Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P2626 Hyundai?

Faulty HO2S Bank 1 Sensor 1
HO2S Bank 1 Sensor 1 harness is open or shorted
HO2S Bank 1 Sensor 1 circuit poor electrical connection

How to Fix the DTC P2626 Hyundai?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2626 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2626 Hyundai code?

Need more information on how to fix the P2626 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2626 Hyundai code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2626 Hyundai Code

1. What are the common symptoms of OBDII code P2626 in a Hyundai?

- Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and potential stalling.

2. What does the OBDII code P2626 "HO2S Pumping Current Trim Circuit/Open Bank 1 Sensor 1" mean for a Hyundai?

- This code indicates an issue with the oxygen sensor (Bank 1 Sensor 1) circuit, specifically related to the pumping current trim.

3. What are the possible causes of OBDII code P2626 in a Hyundai?

- Potential causes include a faulty oxygen sensor, damaged wiring or connectors, a malfunctioning PCM (powertrain control module), or an exhaust system leak.

4. How can I diagnose the OBDII code P2626 in my Hyundai?

- Diagnosis typically involves using an OBDII scanner to read the code, inspecting the oxygen sensor and related components, and testing the wiring for continuity and proper voltage.

5. Can I continue to drive my Hyundai with the OBDII code P2626 present?

- It is not recommended to drive the vehicle with this code active, as it can lead to further engine damage and decreased performance over time.

6. How can I repair OBDII code P2626 in my Hyundai?

- Repair options may include replacing the oxygen sensor, repairing or replacing damaged wiring, addressing any exhaust leaks, and resetting the fault code with an OBDII scanner.

7. Will resetting the OBDII code P2626 in my Hyundai make it go away permanently?

- Resetting the code without addressing the underlying issue will likely result in the code reappearing once the vehicle is driven and the PCM detects the same fault.

8. How much does it typically cost to repair OBDII code P2626 in a Hyundai?

- The cost of repair can vary depending on the exact cause of the code, but it may range from $100 to $500 or more, including parts and labor.

9. Is OBDII code P2626 a common issue in Hyundai vehicles?

- While not as common as some other OBDII codes, P2626 can occur in Hyundai vehicles, especially in older models or those with high mileage.

10. Can I prevent OBDII code P2626 from occurring in my Hyundai?

- Regular maintenance, such as checking and replacing oxygen sensors as recommended, inspecting wiring for damage, and addressing any exhaust system issues promptly, can help prevent this code from occurring.