AutoCodes – Cadillac – P2619 Cadillac

P2619 Cadillac Code - Crankshaft Position Signal Output Circuit High Voltage

Quick Answer

The Crankshaft Position Sensor is also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2619 Cadillac indicates Crankshaft Position Signal Output Circuit High Voltage.
Common causes: Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 597

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2619 Cadillac Description

The Crankshaft Position Sensor is also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field causes the voltage from the sensor to change.
The Diagnostic Trouble Code (DTC) will be set when the Crankshaft Position Signal Output Circuit is short to voltage for greater than 5 s.

OBDII Code P2619 Cadillac - Crankshaft Position Signal Output Circuit High Voltage - AutoCodes.com — P2619 Cadillac Code - Crankshaft Position Signal Output Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P2619 Cadillac?

Faulty Crankshaft Position Sensor
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection

How to Fix the DTC P2619 Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2619 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2619 Cadillac code?

Need more information on how to fix the P2619 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2619 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2619 Cadillac Code

What does the OBDII code P2619 mean for my Cadillac?

The OBDII code P2619 indicates a high voltage condition in the crankshaft position signal output circuit, which may affect engine timing and performance.

What are the common symptoms associated with the P2619 code?

Common symptoms include rough idling, stalling, poor acceleration, and difficulty starting the engine.

What could cause the P2619 code to trigger?

Causes may include a faulty crankshaft position sensor, damaged wiring or connectors in the circuit, or issues with the engine control module (ECM).

Can I drive my Cadillac with the P2619 code?

While it may be possible to drive your vehicle, it is not recommended as it can lead to further engine performance issues or damage.

How can I diagnose the P2619 code?

You can start by checking the crankshaft position sensor and its wiring for damage, then use a multimeter to test the sensor's output voltage. Scanning the vehicle for additional codes can also provide more insight.

What repairs are typically needed for the P2619 code?

Repairs may involve replacing the crankshaft position sensor, repairing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.

How can I prevent the P2619 code from reoccurring?

Regular maintenance, including checking and securing electrical connections and keeping the engine clean, can help prevent issues that may lead to code P2619.

Is it safe to ignore the P2619 code?

Ignoring this code is not safe, as it can lead to engine performance issues and potential engine damage over time.

What tools do I need to fix the P2619 code?

Tools typically include a multimeter for testing electrical components, an OBDII scanner to read codes, and basic hand tools for sensor replacement or wiring repair.