P2618 2014 Chevrolet Silverado Code - Crankshaft Position Signal Output Circuit Low Voltage
Quick Answer
The Crankshaft Position Sensor is also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2618 2014 Chevrolet Silverado indicates Crankshaft Position Signal Output Circuit Low Voltage.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2618 2014 Chevrolet Silverado Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field causes the voltage from the sensor to change.
The Diagnostic Trouble Code (DTC) will be set when the Crankshaft Position Signal Output Circuit is short to ground or open for greater than 5 s.
What are the Possible Causes of the DTC P2618 2014 Chevrolet Silverado?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P2618 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2618 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2618 2014 Chevrolet Silverado code?
Need more information on how to fix the P2618 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2618 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2618 2014 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P2618 on a 2014 Chevrolet Silverado?
The common symptoms of P2618 include engine stalling, rough idling, poor acceleration, and difficulty starting the vehicle.
2. What can cause the OBDII code P2618 in a 2014 Chevrolet Silverado?
The P2618 code in a 2014 Chevrolet Silverado is typically caused by issues with the crankshaft position sensor, damaged wiring or connectors in the crankshaft position signal output circuit, or a faulty ECM.
3. How do I diagnose the OBDII code P2618 on my 2014 Chevrolet Silverado?
Diagnosing the P2618 code involves using a diagnostic scanner to read the code, inspecting the wiring and connectors related to the crankshaft position sensor, and testing the sensor's output voltage.
4. Can a faulty crankshaft position sensor cause the OBDII code P2618 on a 2014 Chevrolet Silverado?
Yes, a faulty crankshaft position sensor can trigger the P2618 code by sending a low voltage signal to the ECM, indicating a problem with the crankshaft position signal output circuit.
5. What repairs are recommended for fixing the OBDII code P2618 on a 2014 Chevrolet Silverado?
Common repairs for the P2618 code include replacing the crankshaft position sensor, repairing or replacing damaged wiring or connectors in the circuit, and resetting the ECM after the repairs are completed.
6. How serious is the OBDII code P2618 in a 2014 Chevrolet Silverado?
While the P2618 code may not cause immediate harm to the vehicle, it can lead to poor engine performance and potential stalling, making it important to address the issue promptly.
7. Can I drive my 2014 Chevrolet Silverado with the OBDII code P2618?
It is not recommended to drive your Silverado with the P2618 code present, as it can lead to further engine problems and potential safety hazards on the road.
8. How much does it cost to repair the OBDII code P2618 on a 2014 Chevrolet Silverado?
The cost of repairing the P2618 code can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Will resetting the ECM clear the OBDII code P2618 on a 2014 Chevrolet Silverado?
Resetting the ECM may temporarily clear the code, but if the underlying issue causing P2618 is not fixed, the code is likely to reappear after driving the vehicle.
10. How long does it take to repair the OBDII code P2618 on a 2014 Chevrolet Silverado?
The repair time for the P2618 code can vary based on the specific repairs needed, but it typically takes 1-2 hours to diagnose and fix the issue.
Discuss the causes and fixes for P2618 2014 Chevrolet Silverado OBDII Code
Code P2618 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
