P2617 Dodge Code - Crankshaft Position Signal Output Circuit/Open
Quick Answer
The Crankshaft Position Sensor also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P2617 Dodge indicates Crankshaft Position Signal Output Circuit/Open.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P2617 Dodge Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P2617 Dodge?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
How to Fix the DTC P2617 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2617 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2617 Dodge code?
Need more information on how to fix the P2617 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2617 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2617 Dodge Code
1. What does the OBDII code P2617 mean for a Dodge vehicle?
P2617 indicates an issue with the Crankshaft Position Signal Output Circuit, often due to an open or malfunction in the signal wiring or sensor.
2. What are the common symptoms of code P2617 in a Dodge?
Symptoms may include difficulty starting the engine, engine misfires, stalling, reduced performance, and illumination of the check engine light.
3. What causes the P2617 code in a Dodge vehicle?
Common causes include damaged wiring or connectors, a faulty crankshaft position sensor, issues with the PCM (Powertrain Control Module), or corrosion in the circuit.
4. Can I drive my Dodge with the P2617 code?
Driving with this code is not recommended, as it can lead to further engine performance issues or damage due to improper timing.
5. How is the P2617 code diagnosed in a Dodge?
Technicians use an OBDII scanner to retrieve the code, inspect the crankshaft position sensor, wiring, and connectors, and test the PCM for proper functionality.
6. How do you fix the P2617 code in a Dodge?
Repairs may involve replacing the crankshaft position sensor, repairing or replacing damaged wiring or connectors, or addressing PCM issues if necessary.
7. Can a faulty crankshaft position sensor cause the P2617 code?
Yes, a malfunctioning crankshaft position sensor is a common cause of this code.
8. Is the P2617 code related to timing issues in the engine?
Yes, this code can affect engine timing, which may result in misfires or poor engine performance.
9. How much does it typically cost to repair the P2617 code on a Dodge?
Repair costs vary but typically range from $150 to $400, depending on whether the crankshaft position sensor, wiring, or PCM needs replacement.
10. Can a weak battery cause the P2617 code in a Dodge?
While unlikely, a weak battery or poor electrical connections can sometimes contribute to circuit-related issues.
Discuss the causes and fixes for P2617 Dodge OBDII Code
Code P2617 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
