AutoCodes – GMC – P2614 GMC

P2614 GMC Code - Camshaft Position Signal Output Circuit/Open

Quick Answer

The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2614 GMC indicates Camshaft Position Signal Output Circuit/Open.
Common causes: Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,431

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 20, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2614 GMC Description

The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection. The camshaft position sensor senses the retraction of camshaft (intake) to identify a particular cylinder. The camshaft position sensor senses the piston position. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.

OBDII Code P2614 GMC - Camshaft Position Signal Output Circuit/Open - AutoCodes.com — P2614 GMC Code - Camshaft Position Signal Output Circuit/Open

What does this mean?

What are the Possible Causes of the DTC P2614 GMC?

Faulty Camshaft Position Sensor
Camshaft Position Sensor harness is open or shorted
Camshaft Position Sensor circuit poor electrical connection

How to Fix the DTC P2614 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2614 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2614 GMC code?

Need more information on how to fix the P2614 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2614 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2614 GMC Code

1. What are the common symptoms of OBDII code P2614 in a GMC vehicle?

- Common symptoms include engine misfires, rough idling, poor acceleration, and potential stalling.

2. What can cause the OBDII code P2614 (Camshaft Position Signal Output Circuit/Open) in a GMC vehicle?

- Possible causes include a faulty camshaft position sensor, wiring issues, poor electrical connections, or a damaged sensor.

3. How does the camshaft position sensor contribute to triggering the P2614 code in a GMC vehicle?

- The camshaft position sensor helps the engine control module monitor the position of the camshaft, and an open circuit or signal disruption can trigger the code.

4. How can I diagnose the OBDII code P2614 in my GMC vehicle?

- Use a diagnostic scanner to retrieve the code, inspect the camshaft position sensor and its wiring, and check for any loose or damaged connections.

5. Can a DIY enthusiast repair the P2614 code in a GMC vehicle at home?

- Depending on your skill level, you may be able to replace the camshaft position sensor or repair wiring issues yourself. However, seeking professional help is recommended for accurate diagnosis and repair.

6. Are there any tips to prevent the recurrence of the P2614 code in a GMC vehicle?

- Regularly inspect and maintain the camshaft position sensor, ensure proper wiring connections, and address any engine performance issues promptly to prevent the code from reoccurring.

7. Is it safe to drive a GMC vehicle with the OBDII code P2614 active?

- Driving with the P2614 code may result in poor engine performance and potential stalling, so it is advisable to address the issue promptly to prevent further damage.

8. Can a faulty camshaft position sensor cause other issues besides triggering the P2614 code?

- Yes, a faulty camshaft position sensor can lead to poor fuel efficiency, rough idling, difficulty starting the engine, and potential damage to other engine components.

9. How much does it typically cost to repair the OBDII code P2614 in a GMC vehicle?

- The cost of repairing the P2614 code can vary depending on the exact cause, but it may range from $100 to $300 for parts and labor.

10. Is resetting the check engine light after repairing the P2614 code necessary?

- Yes, it is recommended to reset the check engine light after repairing the P2614 code to ensure the system recognizes that the issue has been resolved.