AutoCodesDodge – P2610 Dodge

P2610 Dodge Code - PCM Internal Engine Off Timer Performance

Quick Answer

The Powertrain Control Module (PCM) contains a timer and measures time between an ignition switch OFF and the next ignition switch ON. Common causes include Faulty Powertrain Control Module (PCM), PCM Harness is open or shorted, PCM Circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2610 Dodge indicates PCM Internal Engine Off Timer Performance.
Common causes
Common causes include Faulty Powertrain Control Module (PCM), PCM Harness is open or shorted, PCM Circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 13,414
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 30, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2610 Dodge Description

The Powertrain Control Module (PCM) contains a timer and measures time between an ignition switch OFF and the next ignition switch ON. This enables the judging of the state of engine cooling at an engine start. A rationality error has been detected for the PCM internal engine off timer performance test. An internal PCM failure is detected and the Diagnostic Trouble Code (DTC) will set.
OBDII Code P2610 Dodge - PCM Internal Engine Off Timer Performance - AutoCodes.com
P2610 Dodge Code - PCM Internal Engine Off Timer Performance

What are the Possible Causes of the DTC P2610 Dodge?

  • Faulty Powertrain Control Module (PCM)
  • PCM Harness is open or shorted
  • PCM Circuit poor electrical connection
  • PCM outdated program

How to Fix the DTC P2610 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2610 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2610 Dodge code?

Need more information on how to fix the P2610 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2610 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2610 Dodge Code

1. What does the OBDII code P2610 mean for a Dodge vehicle?

P2610 indicates an issue with the PCM's internal engine off timer performance, meaning the PCM is not properly tracking the time since the engine was last turned off.

2. What are the common symptoms of code P2610 on a Dodge?

Symptoms may include difficulty starting the engine, reduced fuel efficiency, erratic idle, and the check engine light being illuminated.

3. What causes the P2610 code to appear in a Dodge?

Common causes include a faulty PCM, issues with the PCM's software, battery problems, or wiring and connector issues related to the PCM.

4. Can a weak battery cause the P2610 code on a Dodge?

Yes, a weak or failing battery can disrupt the PCM’s internal timer and trigger the P2610 code.

5. How is code P2610 diagnosed in a Dodge?

Diagnosis typically involves using a scan tool to verify the code, inspecting the PCM for faults, checking battery voltage, and inspecting wiring and connectors for damage.

6. Can the P2610 code affect engine performance on a Dodge?

While the code itself may not directly impact performance, it can lead to issues like starting difficulty or erratic behavior due to improper PCM operation.

7. How do you fix the P2610 code on a Dodge?

Repairs may include updating or reprogramming the PCM, replacing a faulty PCM, repairing damaged wiring, or replacing a weak battery.

8. Is it safe to drive with the P2610 code on a Dodge?

While the vehicle may still be operable, driving with this code can lead to further PCM issues or starting problems, so it’s best to address it promptly.

9. How much does it cost to fix the P2610 code on a Dodge?

Repair costs can vary depending on the issue, ranging from $100 for a battery replacement to over $500 for PCM repair or replacement.

10. Does the P2610 code on a Dodge require PCM replacement?

Not always. Sometimes the issue can be resolved with a PCM software update or battery replacement rather than full PCM replacement.

Discuss the causes and fixes for P2610 Dodge OBDII Code

Code P2610 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play