AutoCodes – Toyota – P2610 2010 Toyota Camry

P2610 2010 Toyota Camry Code - ECM Internal Engine Off Timer Performance

Quick Answer

5 hours after the ignition switch is turned OFF, the soak timer activates the Engine Control Module (ECM) to begin the EVAP system monitor. Common causes include Faulty Engine Control Module (ECM), ECM Harness is open or shorted, ECM Circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2610 2010 Toyota Camry indicates ECM Internal Engine Off Timer Performance.
Common causes: Common causes include Faulty Engine Control Module (ECM), ECM Harness is open or shorted, ECM Circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,209

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 19, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2610 2010 Toyota Camry Description

5 hours after the ignition switch is turned OFF, the soak timer activates the Engine Control Module (ECM) to begin the EVAP system monitor. While the engine is running, the ECM monitors the synchronization of the soak timer and the CPU clock. If these two are not synchronized, the ECM interprets this as a malfunction, illuminates the MIL and sets the Diagnostic Trouble Code (DTC).

OBDII Code P2610 2010 Toyota Camry - ECM Internal Engine Off Timer Performance - AutoCodes.com — P2610 2010 Toyota Camry Code - ECM Internal Engine Off Timer Performance

What does this mean?

What are the Possible Causes of the DTC P2610 2010 Toyota Camry?

Faulty Engine Control Module (ECM)
ECM Harness is open or shorted
ECM Circuit poor electrical connection
ECM outdated program

How to Fix the DTC P2610 2010 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2610 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2610 2010 Toyota Camry code?

Need more information on how to fix the P2610 2010 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2610 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2610 2010 Toyota Camry Code

1. What does the OBDII code P2610 mean for a 2010 Toyota Camry?

P2610 indicates an issue with the ECM (Engine Control Module) internal engine off timer, where the timer's performance is outside of normal parameters.

2. What are common symptoms of code P2610 in a 2010 Toyota Camry?

Symptoms may include a check engine light, difficulty starting the engine, reduced fuel efficiency, or irregular engine operation.

3. What causes the P2610 code to appear on a 2010 Toyota Camry?

Common causes include a faulty ECM, software glitches, weak or disconnected battery, or wiring issues related to the ECM.

4. How do I diagnose the P2610 code on a 2010 Toyota Camry?

Start by checking the battery and its connections, inspect the ECM wiring, and use a scan tool to confirm the code and check for related codes.

5. Can a weak battery cause the P2610 code on a 2010 Toyota Camry?

Yes, a weak or failing battery can disrupt the ECMâ€™s timer function and trigger the P2610 code.

6. Is it safe to drive a 2010 Toyota Camry with the P2610 code?

While the vehicle might still operate, driving with this code can lead to engine performance issues and should be addressed promptly to avoid further complications.

7. What repairs can fix the P2610 code on a 2010 Toyota Camry?

Repairs may include reprogramming or replacing the ECM, repairing faulty wiring, or replacing the battery if itâ€™s weak or failing.

8. How much does it cost to fix a P2610 code on a 2010 Toyota Camry?

Repair costs can range from $100 for battery or wiring fixes to $800 or more for ECM replacement, depending on the issue.

9. Can the P2610 code be cleared without repairing the issue?

Clearing the code with a scan tool might temporarily turn off the check engine light, but the issue will persist, and the code will likely return.

10. Do I need to replace the ECM if my 2010 Toyota Camry shows a P2610 code?

Not necessarily; the issue could be caused by software glitches, wiring, or a weak battery. Only replace the ECM if itâ€™s confirmed as the root cause after diagnosis.