AutoCodes – Scion – P2610 2007 Scion xB

P2610 2007 Scion xB Code - ECM Internal Engine Off Timer Performance

Quick Answer

5 hours after the ignition switch is turned OFF, the soak timer activates the Engine Control Module (ECM) to begin the EVAP system monitor. Common causes include Faulty Engine Control Module (ECM), ECM Harness is open or shorted, ECM Circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2610 2007 Scion xB indicates ECM Internal Engine Off Timer Performance.
Common causes: Common causes include Faulty Engine Control Module (ECM), ECM Harness is open or shorted, ECM Circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,458

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 19, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2610 2007 Scion xB Description

5 hours after the ignition switch is turned OFF, the soak timer activates the Engine Control Module (ECM) to begin the EVAP system monitor. While the engine is running, the ECM monitors the synchronization of the soak timer and the CPU clock. If these two are not synchronized, the ECM interprets this as a malfunction, illuminates the MIL and sets the Diagnostic Trouble Code (DTC).

OBDII Code P2610 2007 Scion xB - ECM Internal Engine Off Timer Performance - AutoCodes.com — P2610 2007 Scion xB Code - ECM Internal Engine Off Timer Performance

What does this mean?

What are the Possible Causes of the DTC P2610 2007 Scion xB?

Faulty Engine Control Module (ECM)
ECM Harness is open or shorted
ECM Circuit poor electrical connection
ECM outdated program

How to Fix the DTC P2610 2007 Scion xB?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2610 2007 Scion xB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2610 2007 Scion xB code?

Need more information on how to fix the P2610 2007 Scion xB code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2610 2007 Scion xB code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2610 2007 Scion xB Code

1. What are the common symptoms of OBDII code P2610 in a 2007 Scion xB?

The common symptoms of P2610 in a 2007 Scion xB include engine stalling, rough idle, decreased fuel efficiency, and difficulty starting the vehicle.

2. What does the OBDII code P2610 ECM Internal Engine Off Timer Performance mean?

P2610 indicates that the Engine Control Module (ECM) has detected a performance issue with the internal engine off timer function. This function determines the appropriate timing for shutting off the engine.

3. What are the possible causes of OBDII code P2610 on a 2007 Scion xB?

Possible causes of code P2610 in a 2007 Scion xB include a faulty ECM, wiring issues, a defective engine off timer sensor, or a malfunctioning timer circuit.

4. How serious is OBDII code P2610 ECM Internal Engine Off Timer Performance in a 2007 Scion xB?

Code P2610 should be addressed promptly as it can lead to engine performance issues, stalling, and potential safety concerns while driving.

5. How can I diagnose OBDII code P2610 in my 2007 Scion xB?

Diagnosing P2610 involves using an OBDII scanner to retrieve the code, checking for any related symptoms, inspecting the engine off timer sensor and circuit, and testing the ECM for proper functioning.

6. Can I drive my 2007 Scion xB with OBDII code P2610?

It is not recommended to drive your Scion xB with code P2610 present, as it can lead to engine stalling and other performance issues that may compromise your safety on the road.

7. How can I repair OBDII code P2610 in a 2007 Scion xB?

Repairing P2610 may involve replacing the ECM, repairing any damaged wiring, replacing the engine off timer sensor, or addressing any issues with the timer circuit as needed.

8. Will resetting the OBDII code P2610 in my 2007 Scion xB make it go away permanently?

Simply resetting the code may temporarily clear the check engine light, but if the underlying issue causing P2610 is not addressed, the code is likely to reappear.

9. Can a DIY enthusiast fix OBDII code P2610 in a 2007 Scion xB?

While some aspects of diagnosing and repairing P2610 may be feasible for a DIY enthusiast, it is recommended to consult a professional mechanic for an accurate diagnosis and proper repair.

10. How much does it cost to fix OBDII code P2610 ECM Internal Engine Off Timer Performance in a 2007 Scion xB?

The cost of fixing P2610 in a 2007 Scion xB can vary depending on the specific cause of the issue, the required repairs, and labor costs. It is advisable to obtain quotes from local mechanics for an accurate estimate.