P2600 Code - Coolant Pump 'A' Control Circuit/Open
Quick Answer
The Powertrain Control Module (PCM) monitors the Coolant Pump 'A' Control Circuit signal. Common causes include Faulty Coolant Pump Relay, Faulty Coolant Pump, Coolant Pump harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2600 indicates Coolant Pump 'A' Control Circuit/Open.
- Common causes
- Common causes include Faulty Coolant Pump Relay, Faulty Coolant Pump, Coolant Pump harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2600 Description
What are the Possible Causes of the DTC P2600?
- Faulty Coolant Pump Relay
- Faulty Coolant Pump
- Coolant Pump harness is open or shorted
- Coolant Pump poor electrical connection
How to Fix the DTC P2600?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2600 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2600 code?
Need more information on how to fix the P2600 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2600 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2600 Audi — Coolant Pump 'A' Control Circuit/Open
- P2600 Buick — Auxiliary Coolant Pump Circuit/Open
- P2600 Cadillac — Auxiliary Coolant Pump Circuit/Open
- P2600 Chevrolet — Auxiliary Coolant Pump Circuit/Open
- P2600 Dodge — Coolant Pump 'A' Control Circuit/Open
- P2600 GMC — Auxiliary Coolant Pump Circuit/Open
Frequently Asked Questions about P2600 Code
1. What are the common symptoms of OBDII code P2600 (Coolant Pump 'A' Control Circuit/Open)?
- Common symptoms include the engine overheating, low coolant warning light illuminated on the dashboard, and potential loss of cabin heat.
2. What are the possible causes of OBDII code P2600?
- The code P2600 may be triggered by a faulty coolant pump, a malfunctioning coolant pump control module, a broken or disconnected wiring harness, or a blown fuse related to the coolant pump circuit.
3. How can I diagnose the cause of OBDII code P2600?
- To diagnose the issue, you can start by checking the coolant pump fuse, inspecting the wiring harness for any damage, testing the coolant pump for proper operation, and using a diagnostic scanner to read live data and monitor the coolant pump control module.
4. Is it safe to continue driving with OBDII code P2600 present?
- It is not recommended to drive with the P2600 code as it could lead to engine overheating and potential damage. It is best to address the issue promptly to avoid further complications.
5. Can I repair OBDII code P2600 myself?
- Depending on your automotive knowledge and skills, you may be able to repair the P2600 code yourself by replacing the faulty coolant pump, repairing the wiring harness, or addressing any issues with the coolant pump control module. However, it is advisable to seek professional help if you are unsure.
6. How much does it typically cost to fix OBDII code P2600?
- The cost of repairing the P2600 code can vary depending on the underlying cause of the issue, the cost of parts, and labor rates in your area. It is recommended to obtain quotes from reputable auto repair shops for an accurate estimate.
7. Can a malfunctioning thermostat cause OBDII code P2600?
- While a malfunctioning thermostat can contribute to engine overheating issues, it is not a direct cause of OBDII code P2600. The code is specifically related to the control circuit of the coolant pump 'A'.
8. Will resetting the OBDII system clear the P2600 code?
- Resetting the OBDII system may temporarily clear the P2600 code, but if the underlying issue is not addressed, the code is likely to reappear once the system detects the fault again.
9. Does OBDII code P2600 affect the vehicle's performance?
- In addition to potential engine overheating, the P2600 code can impact the vehicle's performance by causing reduced coolant flow, which can lead to inefficient engine cooling and decreased overall performance.
10. How can I prevent OBDII code P2600 from occurring in the future?
- To prevent the recurrence of the P2600 code, it is essential to perform regular maintenance on the cooling system, check for any signs of coolant leaks, and address any cooling system issues promptly to ensure proper operation of the coolant pump circuit.
Discuss the causes and fixes for P2600 OBDII Code
Code P2600 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
