P2545 Buick Code - Torque Management Request Input Signal 'A' Range/Performance
Quick Answer
To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2545 Buick indicates Torque Management Request Input Signal 'A' Range/Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2545 Buick Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2545 Buick?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module (ECM) software update
- Transmission Control Module (TCM) software update
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P2545 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2545 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2545 Buick code?
Need more information on how to fix the P2545 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2545 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2545 Buick Code
1. What are the common symptoms of OBDII code P2545 in a Buick?
Symptoms may include engine hesitation, reduced power, illuminated Check Engine Light, and harsh shifting.
2. What are the potential causes of OBDII code P2545 in a Buick?
Possible causes include a faulty torque management sensor, damaged wiring or connectors, a malfunctioning transmission control module, or software issues.
3. How can I diagnose OBDII code P2545 in my Buick?
Diagnosis typically involves using a scan tool to retrieve the code, checking the sensor and related components for physical damage, and testing the wiring for continuity and proper voltage.
4. Can I still drive my Buick with OBDII code P2545 present?
It is generally not recommended to drive the vehicle with this code active, as it can lead to performance issues and potential damage to the transmission.
5. How serious is OBDII code P2545 in a Buick?
This code should be addressed promptly to prevent further damage to the transmission and ensure proper vehicle performance.
6. Are there any DIY repair tips for fixing OBDII code P2545 in a Buick?
DIY repairs may include checking and cleaning the sensor connections, inspecting the wiring for damage, and resetting the code with a scan tool after making any necessary repairs.
7. Can a faulty torque management sensor be repaired, or does it need to be replaced?
In most cases, a faulty torque management sensor will need to be replaced to resolve OBDII code P2545 and restore proper vehicle operation.
8. How much does it typically cost to repair OBDII code P2545 in a Buick?
Repair costs can vary depending on the exact cause of the code, but they may range from $200 to $500, including parts and labor.
9. Will resetting the OBDII code P2545 in my Buick make it go away permanently?
Resetting the code may temporarily turn off the Check Engine Light, but if the underlying issue is not addressed, the code is likely to reappear.
10. Is it recommended to seek professional help for diagnosing and repairing OBDII code P2545 in a Buick?
Due to the complexity of the transmission system and associated components, it is advisable to consult a qualified mechanic or dealership for proper diagnosis and repair of this code.
Discuss the causes and fixes for P2545 Buick OBDII Code
Code P2545 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
