AutoCodes – Buick – P2537 Buick

P2537 Buick Code - Ignition Accessory Switch Circuit Low Voltage

Quick Answer

The control module continuously monitors the voltage on the Ignition Accessory/Run circuit from the Body Control Module (BCM). Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2537 Buick indicates Ignition Accessory Switch Circuit Low Voltage.
Common causes
Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 535
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 21, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2537 Buick Description

The control module continuously monitors the voltage on the Ignition Accessory/Run circuit from the Body Control Module (BCM). When the ignition is in the ACCESSORY or RUN position, the BCM sends a 12 V wake-up signal to the control module. This wake-up signal allows the control module to power up and start functioning before the engine is started. The Diagnostic Trouble Code (DTC) will be set when the control module detects the Ignition Accessory/Run circuit is less than 6 V for 1 min.

OBDII Code P2537 Buick - Ignition Accessory Switch Circuit Low Voltage - AutoCodes.com
P2537 Buick Code - Ignition Accessory Switch Circuit Low Voltage

What are the Possible Causes of the DTC P2537 Buick?

  • Faulty Body Control Module (BCM)
  • Body Control Module harness is open or shorted
  • Body Control Module circuit poor electrical connection

How to Fix the DTC P2537 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2537 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2537 Buick code?

Need more information on how to fix the P2537 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2537 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2537 Buick Code

What does the OBDII code P2537 mean on a Buick?

P2537 indicates that the Powertrain Control Module (PCM) has detected low voltage in the ignition accessory switch circuit, which may affect electrical system operation.

What are the common symptoms of code P2537 in a Buick?

Common symptoms include difficulty starting the vehicle, intermittent electrical issues, accessory features not functioning, and a check engine light illuminated.

What causes code P2537 in a Buick?

Possible causes include a faulty ignition switch, damaged wiring or connectors in the accessory circuit, a weak or failing battery, or issues with the PCM.

Can a low battery cause code P2537 in a Buick?

Yes, a weak or dying battery can result in insufficient voltage being supplied to the ignition accessory switch circuit, triggering code P2537.

How can I fix code P2537 on my Buick?

Repairs may involve inspecting and replacing the ignition switch, repairing damaged wiring or connectors, checking the battery voltage, or addressing PCM-related issues.

Is it safe to drive with code P2537 on a Buick?

While the vehicle may still be drivable, electrical issues could worsen over time. It's best to diagnose and repair the problem promptly to avoid unexpected failures.

How do I know if the ignition switch is causing code P2537?

If accessories like the radio or power windows fail to function properly or there are intermittent starting issues, the ignition switch might be the culprit.

Will replacing the battery clear code P2537 on a Buick?

If the code is due to low voltage caused by a weak battery, replacing the battery may resolve the issue. However, you should verify the cause before replacing any parts.

What tools are needed to diagnose code P2537 on a Buick?

A multimeter to check voltage, an OBDII scanner to read and clear codes, and basic tools to inspect wiring and connectors are typically required.

Can code P2537 lead to other problems in a Buick?

Yes, if left unaddressed, it may cause further electrical issues or prevent the vehicle from starting altogether, leading to increased repair costs.

Discuss the causes and fixes for P2537 Buick OBDII Code

Code P2537 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play