AutoCodes – Chevrolet – P2537 2014 Chevrolet Silverado

P2537 2014 Chevrolet Silverado Code - Ignition Accessory Switch Circuit Low Voltage

Quick Answer

The control module continuously monitors the voltage on the Ignition Accessory/Run circuit from the Body Control Module (BCM). Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2537 2014 Chevrolet Silverado indicates Ignition Accessory Switch Circuit Low Voltage.
Common causes: Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 321

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2537 2014 Chevrolet Silverado Description

The control module continuously monitors the voltage on the Ignition Accessory/Run circuit from the Body Control Module (BCM). When the ignition is in the ACCESSORY or RUN position, the BCM sends a 12 V wake-up signal to the control module. This wake-up signal allows the control module to power up and start functioning before the engine is started. The Diagnostic Trouble Code (DTC) will be set when the control module detects the Ignition Accessory/Run circuit is less than 6 V for 1 min.

OBDII Code P2537 2014 Chevrolet Silverado - Ignition Accessory Switch Circuit Low Voltage - AutoCodes.com — P2537 2014 Chevrolet Silverado Code - Ignition Accessory Switch Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P2537 2014 Chevrolet Silverado?

Faulty Body Control Module (BCM)
Body Control Module harness is open or shorted
Body Control Module circuit poor electrical connection

How to Fix the DTC P2537 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2537 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2537 2014 Chevrolet Silverado code?

Need more information on how to fix the P2537 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2537 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2537 2014 Chevrolet Silverado Code

1. What does the OBDII code P2537 mean on a 2014 Chevrolet Silverado?

P2537 indicates an "Ignition Accessory Switch Circuit Low Voltage," meaning the voltage in the ignition accessory circuit is below the manufacturerâ€™s specified range.

2. What are the common symptoms of the P2537 code on a 2014 Silverado?

Symptoms may include intermittent starting issues, accessories not powering on, dashboard warning lights, or the vehicle entering limp mode.

3. What causes the P2537 code to appear in a 2014 Chevrolet Silverado?

Possible causes include a faulty ignition switch, damaged wiring or connectors in the ignition circuit, a weak battery, or a malfunctioning body control module (BCM).

4. Can a weak battery trigger the P2537 code in my Silverado?

Yes, a weak or discharged battery can cause low voltage in the ignition accessory circuit, potentially triggering the P2537 code.

5. How do I diagnose the P2537 code on a 2014 Chevy Silverado?

Begin by checking the battery voltage, inspecting the ignition switch and wiring for damage or corrosion, and testing the accessory circuit for proper voltage using a multimeter.

6. Is it safe to drive my 2014 Silverado with the P2537 code?

Driving may be possible, but itâ€™s not recommended since the vehicle could experience starting problems or electrical system malfunctions, potentially leaving you stranded.

7. How do I fix the P2537 code on my Silverado?

Repairs may involve replacing the ignition switch, repairing damaged wiring or connectors, ensuring the battery is fully charged or replaced, and resetting the code with an OBDII scanner.

8. Could a faulty ignition switch cause the P2537 code?

Yes, a failing ignition switch can prevent the proper voltage from being supplied to the accessory circuit, triggering the P2537 code.

9. How much does it typically cost to fix the P2537 code on a 2014 Silverado?

The repair cost can vary depending on the cause, but replacing an ignition switch typically costs $150-$300, while wiring repairs may range from $50 to $200.

10. Will clearing the P2537 code with a scanner fix the problem?

Clearing the code will not fix the underlying issue. The problem causing the low voltage in the ignition accessory circuit must be addressed first.