AutoCodes – Cadillac – P2536 Cadillac

P2536 Cadillac Code - Ignition Accessory Switch Circuit

Quick Answer

The control module continuously monitors the voltage on the Ignition Accessory/Run circuit from the Body Control Module (BCM). Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2536 Cadillac indicates Ignition Accessory Switch Circuit.
Common causes
Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 484
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 21, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2536 Cadillac Description

The control module continuously monitors the voltage on the Ignition Accessory/Run circuit from the Body Control Module (BCM). When the ignition is in the ACCESSORY or RUN position, the BCM sends a 12 V wake-up signal to the control module. This wake-up signal allows the control module to power up and start functioning before the engine is started. The Diagnostic Trouble Code (DTC) will be set when the control module detects the Ignition Accessory/Run circuit is less than 6 V for 1 min.
OBDII Code P2536 Cadillac - Ignition Accessory Switch Circuit - AutoCodes.com
P2536 Cadillac Code - Ignition Accessory Switch Circuit

What are the Possible Causes of the DTC P2536 Cadillac?

  • Faulty Body Control Module (BCM)
  • Body Control Module harness is open or shorted
  • Body Control Module circuit poor electrical connection

How to Fix the DTC P2536 Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2536 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2536 Cadillac code?

Need more information on how to fix the P2536 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2536 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2536 Cadillac Code

1. What does the OBDII code P2536 mean on a Cadillac?

P2536 indicates an issue with the Ignition Accessory Switch Circuit, which monitors the signal from the ignition switch to ensure proper accessory power operation.

2. What are the common symptoms of code P2536 in a Cadillac?

Symptoms may include difficulty starting the vehicle, intermittent accessory power loss, non-functional radio or climate controls, and a stored or active check engine light.

3. What causes code P2536 in a Cadillac?

Potential causes include a faulty ignition switch, damaged wiring or connectors in the ignition circuit, a blown fuse, or a failing body control module (BCM).

4. Can I drive my Cadillac with a P2536 code?

While the vehicle may still drive, you could experience accessory power issues or starting problems. It's best to address the issue promptly to avoid further complications.

5. How do I diagnose a P2536 code on a Cadillac?

Start by checking the wiring and connectors in the ignition circuit for damage or corrosion. Then test the ignition switch for proper operation and use a scan tool to check for other related codes.

6. How do I fix code P2536 in a Cadillac?

Repairs might include replacing the ignition switch, repairing damaged wiring or connectors, replacing a blown fuse, or reprogramming or replacing the BCM if necessary.

7. Can a dead battery cause a P2536 code in a Cadillac?

While uncommon, a weak or dead battery could trigger voltage-related electrical issues, potentially affecting the ignition accessory circuit.

8. How much does it cost to fix a P2536 code in a Cadillac?

Repair costs can vary but typically range from $100 to $500 depending on whether the issue is with the ignition switch, wiring, or BCM.

9. Is the P2536 code specific to Cadillacs?

No, the P2536 code is a generic OBDII code, but its symptoms and repair process may vary slightly depending on the make and model of the vehicle.

10. Can I reset the P2536 code without fixing the problem?

You can clear the code with an OBDII scanner, but if the underlying issue isn't resolved, the code and symptoms will likely return.

Discuss the causes and fixes for P2536 Cadillac OBDII Code

Code P2536 Cadillac comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play