AutoCodes – Generic – P2536

P2536 Code - Ignition Accessory Switch Circuit

Quick Answer

The control module continuously monitors the voltage on the Ignition Accessory/Run circuit from the Body Control Module (BCM). Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2536 indicates Ignition Accessory Switch Circuit.
Common causes: Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,774

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2536 Description

The control module continuously monitors the voltage on the Ignition Accessory/Run circuit from the Body Control Module (BCM). When the ignition is in the ACCESSORY or RUN position, the BCM sends a 12 V wake-up signal to the control module. This wake-up signal allows the control module to power up and start functioning before the engine is started. The Diagnostic Trouble Code (DTC) will be set when the control module detects the Ignition Accessory/Run circuit is less than 6 V for 1 min.

OBDII Code P2536 - Ignition Accessory Switch Circuit - AutoCodes.com — P2536 Code - Ignition Accessory Switch Circuit

What does this mean?

What are the Possible Causes of the DTC P2536?

Faulty Body Control Module (BCM)
Body Control Module harness is open or shorted
Body Control Module circuit poor electrical connection

How to Fix the DTC P2536?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2536 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2536 code?

Need more information on how to fix the P2536 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2536 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P2536 Buick — Ignition Accessory Switch Circuit
P2536 Cadillac — Ignition Accessory Switch Circuit
P2536 Chevrolet — Ignition Accessory Switch Circuit
P2536 Dodge — Ignition Accessory Switch Circuit
P2536 GMC — Ignition Accessory Switch Circuit

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.