AutoCodes – GMC – P2534 GMC

P2534 GMC Code - Ignition On/Start Switch Circuit Low Voltage

Quick Answer

The Body Control Module (BCM) controls the ignition main relay through the control circuit by applying a voltage to the circuit. Common causes include Faulty Ignition On/Start Switch, Ignition On/Start Switch harness is open or shorted, Ignition On/Start Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2534 GMC indicates Ignition On/Start Switch Circuit Low Voltage.
Common causes: Common causes include Faulty Ignition On/Start Switch, Ignition On/Start Switch harness is open or shorted, Ignition On/Start Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 21,567

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 12, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2534 GMC Description

The Body Control Module (BCM) controls the ignition main relay through the control circuit by applying a voltage to the circuit. The control module samples the system voltage on the Ignition 1 voltage circuit from the ignition main relay every 0.1 s.
The Diagnostic Trouble Code (DTC) will be set when the control module detects 6 V or less on the ignition voltage circuit, with the ignition, turned ON.

OBDII Code P2534 GMC - Ignition On/Start Switch Circuit Low Voltage - AutoCodes.com — P2534 GMC Code - Ignition On/Start Switch Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P2534 GMC?

Faulty Ignition On/Start Switch
Ignition On/Start Switch harness is open or shorted
Ignition On/Start Switch circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC P2534 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2534 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2534 GMC code?

Need more information on how to fix the P2534 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2534 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

P2534 2014 GMC Sierra — Ignition On/Start Switch Circuit Low Voltage
P2534 2015 GMC Sierra — Ignition On/Start Switch Circuit Low Voltage
P2534 2016 GMC Sierra — Ignition On/Start Switch Circuit Low Voltage
P2534 2017 GMC Sierra — Ignition On/Start Switch Circuit Low Voltage
P2534 2018 GMC Sierra — Ignition On/Start Switch Circuit Low Voltage

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.