AutoCodes – Dodge – P2507 Dodge

P2507 Dodge Code - ECM/PCM Power Input Signal Low

Quick Answer

When the ignition switch is turned "ON", the battery voltage is applied from the battery to the Powertrain Control Module (PCM)/Engine Control Module (ECM) through the main relay. Common causes include Low battery voltage, Faulty Powertrain Control Module (PCM)/Engine Control Module (ECM), ECM/PCM harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2507 Dodge indicates ECM/PCM Power Input Signal Low.
Common causes: Common causes include Low battery voltage, Faulty Powertrain Control Module (PCM)/Engine Control Module (ECM), ECM/PCM harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,366

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 16, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2507 Dodge Description

When the ignition switch is turned "ON", the battery voltage is applied from the battery to the Powertrain Control Module (PCM)/Engine Control Module (ECM) through the main relay. In case that the ignition switch is turned "OFF", the ECM/PCM is supplied with power through the battery power input line to control the basic operation of the vehicle. The ECM/PCM set the OBDII code when the ECM/PCM Power Input is out of factory specifications.

OBDII Code P2507 Dodge - ECM/PCM Power Input Signal Low - AutoCodes.com — P2507 Dodge Code - ECM/PCM Power Input Signal Low

What does this mean?

What are the Possible Causes of the DTC P2507 Dodge?

Low battery voltage
Faulty Powertrain Control Module (PCM)/Engine Control Module (ECM)
ECM/PCM harness is open or shorted
ECM/PCM circuit poor electrical connection

How to Fix the DTC P2507 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2507 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2507 Dodge code?

Need more information on how to fix the P2507 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2507 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2507 Dodge Code

1. What does the OBDII code P2507 mean on a Dodge?

Code P2507 indicates that the ECM/PCM (Engine Control Module/Powertrain Control Module) is receiving a power input signal that is too low, which may cause issues with its operation.

2. What are the common symptoms of code P2507 in a Dodge vehicle?

Symptoms include difficulty starting the engine, stalling, poor fuel economy, rough idling, and the Check Engine Light being illuminated.

3. What causes the P2507 code to appear on a Dodge?

Common causes include a weak or failing battery, corroded or loose battery terminals, a failing alternator, damaged wiring or connectors, or an internal PCM failure.

4. Can a bad battery trigger the P2507 code in a Dodge?

Yes, a weak or failing battery can cause the PCM to receive insufficient voltage, which may trigger the P2507 code.

5. How do I diagnose the P2507 code in my Dodge vehicle?

Start by checking the battery voltage, inspecting battery terminals for corrosion or looseness, testing the alternator output, and examining wiring and connectors for damage.

6. Is it safe to drive a Dodge with the P2507 code?

Driving with the P2507 code may lead to further electrical problems, engine stalling, or poor performance, so itâ€™s best to address the issue promptly.

7. How can I fix the P2507 code on a Dodge?

Repairs may include replacing a weak battery, cleaning or tightening battery terminals, repairing damaged wiring, replacing a faulty alternator, or in rare cases, replacing the PCM.

8. Can a blown fuse cause the P2507 code in a Dodge?

Yes, a blown fuse in the PCM power circuit can interrupt voltage delivery, leading to the P2507 code.

9. How much does it cost to fix the P2507 code on a Dodge?

Repair costs vary depending on the cause, but replacing a battery typically costs $100â€“$250, while alternator repairs or replacements can range from $300â€“$800.

10. Will clearing the P2507 code with a scanner fix the problem?

Clearing the code will turn off the Check Engine Light temporarily, but the underlying issue must be resolved to prevent the code from returning.