P2489 GMC Code - Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic Bank 2 Sensor 5
Quick Answer
The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 5, Exhaust Gas Temperature Sensor Bank 2 Sensor 5 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 5 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2489 GMC indicates Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic Bank 2 Sensor 5.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 5, Exhaust Gas Temperature Sensor Bank 2 Sensor 5 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 5 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P2489 GMC Description
What are the Possible Causes of the DTC P2489 GMC?
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 5
- Exhaust Gas Temperature Sensor Bank 2 Sensor 5 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 2 Sensor 5 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
How to Fix the DTC P2489 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2489 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2489 GMC code?
Need more information on how to fix the P2489 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2489 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2489 GMC Code
1. What are the common symptoms of OBDII code P2489 in a GMC vehicle?
Symptoms may include poor engine performance, reduced fuel efficiency, illuminated Check Engine Light, and potential exhaust system issues.
2. What can cause the OBDII code P2489 in a GMC related to the Exhaust Gas Temperature Sensor Circuit?
Possible causes include a faulty exhaust gas temperature sensor, damaged wiring or connectors, sensor circuit malfunction, or issues with the engine control module (ECM).
3. How can I diagnose the issue causing the OBDII code P2489 in a GMC?
Diagnosis typically involves using a scan tool to read the code, checking the exhaust gas temperature sensor and its circuit for proper operation, inspecting wiring connections, and performing a thorough visual inspection.
4. Is it safe to continue driving with the OBDII code P2489 in a GMC?
It is not recommended to drive with this code present, as it can lead to further engine or exhaust system damage if left unresolved. It's best to address the issue promptly.
5. How can I repair the OBDII code P2489 in a GMC myself?
DIY repair may involve replacing the exhaust gas temperature sensor, repairing or replacing damaged wiring, ensuring proper connections, and resetting the fault code with a scan tool.
6. Can a faulty exhaust gas temperature sensor cause other issues in a GMC vehicle?
Yes, a faulty sensor can lead to poor engine performance, increased emissions, and potential damage to the catalytic converter if left unaddressed.
7. What are some tips to prevent the recurrence of OBDII code P2489 in a GMC?
Regular maintenance, timely sensor replacements, avoiding rough driving conditions, and addressing any related issues promptly can help prevent the code from reoccurring.
8. Is it necessary to clear the OBDII code P2489 after making repairs in a GMC?
Yes, it is important to clear the fault code using a scan tool after resolving the underlying issue. This ensures that the ECM recognizes the repair and can monitor the system properly.
9. Can a mechanic help diagnose and repair the OBDII code P2489 in a GMC?
Yes, a qualified mechanic can perform a thorough diagnosis, pinpoint the exact cause of the code, and carry out the necessary repairs to resolve the issue effectively.
10. How crucial is it to address the OBDII code P2489 promptly in a GMC?
Addressing the code promptly is important to prevent potential engine damage, ensure optimal vehicle performance, and maintain compliance with emission standards.
Discuss the causes and fixes for P2489 GMC OBDII Code
Code P2489 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
