P2487 Ford Code - Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 5
Quick Answer
The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 5, Exhaust Gas Temperature Sensor Bank 2 Sensor 5 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 5 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2487 Ford indicates Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 5.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 5, Exhaust Gas Temperature Sensor Bank 2 Sensor 5 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 5 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P2487 Ford Description
What are the Possible Causes of the DTC P2487 Ford?
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 5
- Exhaust Gas Temperature Sensor Bank 2 Sensor 5 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 2 Sensor 5 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
How to Fix the DTC P2487 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2487 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2487 Ford code?
Need more information on how to fix the P2487 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2487 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2487 Ford Code
1. What does the OBDII code P2487 mean on a Ford vehicle?
P2487 indicates that the Exhaust Gas Temperature (EGT) Sensor Circuit High for Bank 2 Sensor 5 has been detected, meaning the sensor is reading a voltage outside its normal range.
2. What are the common symptoms of code P2487 in a Ford?
Symptoms may include an illuminated Check Engine Light, reduced engine performance, increased emissions, poor fuel economy, or the vehicle entering limp mode.
3. What causes the P2487 code to trigger?
Common causes include a faulty exhaust gas temperature sensor, damaged wiring or connectors, a short to power in the circuit, or a malfunctioning powertrain control module (PCM).
4. How can I diagnose the P2487 code?
Start by inspecting the EGT sensor and its wiring for damage or corrosion. Use a multimeter to check for proper voltage and resistance. Scan the vehicle for additional codes that could indicate related issues.
5. Can I drive my Ford with a P2487 code?
While it may be possible to drive short distances, it is not recommended. Prolonged driving can lead to increased emissions, reduced fuel efficiency, and potential damage to the exhaust system.
6. How do I fix the P2487 code on my Ford?
Repairs might include replacing the faulty EGT sensor, repairing or replacing damaged wiring or connectors, or reprogramming/updating the PCM if necessary.
7. Where is Bank 2 Sensor 5 located?
On Ford vehicles, Bank 2 refers to the side of the engine opposite Bank 1 (typically the side without cylinder 1), and Sensor 5 is usually located further downstream in the exhaust system near or after the catalytic converter.
8. What tools are needed to fix the P2487 code?
You may need an OBDII scanner, a multimeter, basic hand tools, and possibly a replacement EGT sensor to address the issue.
9. How much does it cost to repair the P2487 code on a Ford?
The cost depends on the specific repair. Replacing an EGT sensor typically costs between $100 and $300, including parts and labor, but wiring repairs or PCM updates may vary.
10. Can a dirty or clogged exhaust system cause the P2487 code?
Yes, a clogged exhaust system can cause excessive heat or pressure, potentially leading to an abnormal reading from the EGT sensor and triggering the code.
Discuss the causes and fixes for P2487 Ford OBDII Code
Code P2487 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
