P2476 Ford Code - Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 4
Quick Answer
The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 4, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2476 Ford indicates Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 4.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 4, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P2476 Ford Description
What are the Possible Causes of the DTC P2476 Ford?
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 4
- Exhaust Gas Temperature Sensor Bank 2 Sensor 4 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 2 Sensor 4 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
How to Fix the DTC P2476 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2476 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2476 Ford code?
Need more information on how to fix the P2476 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2476 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2476 Ford Code
1. What are the common symptoms of OBDII code P2476 in a Ford vehicle?
- Common symptoms include the Check Engine Light (CEL) illuminating, reduced engine performance, and potential emission issues.
2. What does the OBDII code P2476 Ford indicate?
- This code indicates a high voltage condition in the exhaust gas temperature sensor circuit for Bank 2 Sensor 4.
3. What are some possible causes of the P2476 code in a Ford vehicle?
- Possible causes include a faulty exhaust gas temperature sensor, wiring issues, a damaged sensor connector, or a problem with the engine control module.
4. Can I continue driving my Ford vehicle with the P2476 code present?
- It is not recommended to continue driving with this code present, as it can lead to further engine or emission system damage.
5. How can I diagnose and repair the P2476 code in my Ford vehicle?
- Diagnosing and repairing this code typically involves testing the exhaust gas temperature sensor, checking the wiring and connector for any faults, and replacing any faulty components as needed.
6. Are there any DIY tips for troubleshooting the P2476 code in a Ford vehicle?
- DIY tips include visually inspecting the sensor and its wiring for any visible damage, checking the sensor's resistance with a multimeter, and ensuring proper connector alignment.
7. How much does it cost to fix the P2476 code in a Ford vehicle?
- The cost of fixing this code can vary depending on the exact cause of the issue, but it may involve replacing the exhaust gas temperature sensor or addressing wiring problems.
8. Can resetting the OBDII code P2476 in a Ford vehicle make it go away permanently?
- Resetting the code may temporarily clear the CEL, but if the underlying issue is not addressed, the code is likely to return.
9. Will the P2476 code cause my Ford vehicle to fail an emissions test?
- Yes, the presence of this code can cause your vehicle to fail an emissions test due to potential issues with the exhaust system.
10. Is it safe to drive my Ford vehicle after the P2476 code has been resolved?
- Once the issue causing the code has been properly repaired, it should be safe to drive your vehicle again without any adverse effects.
Discuss the causes and fixes for P2476 Ford OBDII Code
Code P2476 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
