AutoCodes – Dodge – P2446 Dodge

P2446 Dodge Code - Secondary Air Injection System Pump Stuck On Bank 2

Quick Answer

To accelerate the activation of catalyst when warming up the engine, the air injection system pumps the secondary air to the exhaust manifold by pressure. Common causes include Air pump fuse, Vacuum hose, Air pump assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2446 Dodge indicates Secondary Air Injection System Pump Stuck On Bank 2.
Common causes: Common causes include Air pump fuse, Vacuum hose, Air pump assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,395

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2446 Dodge Description

To accelerate the activation of catalyst when warming up the engine, the air injection system pumps the secondary air to the exhaust manifold by pressure. The secondary air is supplied by the air pump and it is pumped to the exhaust manifold through the air switching valve. Open and close movement of the air switching valve is regulated by the Vacuum Switching Valve (VSV).The air pump and the air switching valve are observed by the Engine Control Module (ECM) and are used to detect malfunction in this system. The ECM monitors the secondary air injection system and detects malfunction using a pressure sensor located on the air switching valve.
The ECM observes the pressure in the secondary air passage using the pressure sensor located on the air switching valve in the secondary air injection system. The sensor detects an exhaust pressure in the secondary air passage.

OBDII Code P2446 Dodge - Secondary Air Injection System Pump Stuck On Bank 2 - AutoCodes.com — P2446 Dodge Code - Secondary Air Injection System Pump Stuck On Bank 2

What does this mean?

What are the Possible Causes of the DTC P2446 Dodge?

Air pump fuse
Vacuum hose
Air pump assembly
Faulty Pressure Sensor
Air pump harness is open or shorted
Air pump circuit poor electrical connection
Pressure Sensor harness is open or shorted
Pressure Sensor circuit poor electrical connection

How to Fix the DTC P2446 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2446 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2446 Dodge code?

Need more information on how to fix the P2446 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2446 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2446 Dodge Code

What does the OBDII code P2446 mean on a Dodge vehicle?

P2446 indicates that the Secondary Air Injection System (SAIS) pump on Bank 2 is stuck in the "on" position, which can affect emissions control.

What are the common symptoms of code P2446 in a Dodge?

Symptoms may include an illuminated check engine light, poor engine performance, increased emissions, and possibly a rough idle during cold starts.

What causes the Secondary Air Injection System pump to get stuck on Bank 2?

Common causes include a faulty air pump, a stuck air pump relay, clogged air passages, wiring issues, or a malfunctioning control module.

How can I diagnose the P2446 code on my Dodge?

Start by checking the air pump relay and wiring, inspecting for blockages in air passages, and testing the air pump for proper operation. Use an OBDII scanner for further diagnostics.

Can I drive my Dodge with a P2446 code?

While it may be possible to drive, it's not recommended because the issue can lead to increased emissions and potentially damage the secondary air injection system over time.

How do I fix the P2446 code in a Dodge vehicle?

Repairs may involve replacing the air pump or relay, cleaning clogged air passages, fixing wiring or electrical issues, or reprogramming the control module.

What tools are needed to repair the P2446 code?

An OBDII scanner, multimeter, and basic hand tools are typically needed to diagnose and repair issues related to this code.

How much does it cost to repair a P2446 code on a Dodge?

Costs can vary, but replacing the air pump may range from $200 to $600, while smaller repairs like replacing a relay or fixing wiring may cost less.

What is the function of the Secondary Air Injection System in a Dodge?

The SAIS reduces harmful emissions by injecting air into the exhaust during cold starts to help burn off excess fuel.

How can I prevent the P2446 code from recurring?

Regular maintenance, ensuring the air pump and associated components are clean and functioning, and addressing electrical issues promptly can help prevent recurrence.