P2430 GMC Code - Secondary Air Injection System Air Flow/Pressure Sensor Circuit Bank 1
Quick Answer
The Secondary Air Injection (AIR) System aids in the reduction of hydrocarbon exhaust emissions during a cold start-up. Common causes include Faulty AIR Pressure Sensor, AIR Pressure Sensor harness is open or shorted, AIR Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2430 GMC indicates Secondary Air Injection System Air Flow/Pressure Sensor Circuit Bank 1.
- Common causes
- Common causes include Faulty AIR Pressure Sensor, AIR Pressure Sensor harness is open or shorted, AIR Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2430 GMC Description
The Powertrain Control Module (PCM) activates the AIR system by simultaneously supplying grounds to the AIR pump and the AIR valve relays. This action closes the relays' internal contacts. The AIR pump and the AIR control solenoid valve/pressure sensor assembly are in turn energized, the pump runs and the control/shut-off valve opens.
The AIR pump sends pressurized fresh air into the pipes/hoses through the open control/shut-off valve, and into the exhaust manifold. The extra air accelerates the catalyst operation, helping it to reach operating temperature faster. The AIR pump remains ON for a short period of time after the control/shut-off valve is commanded OFF. When the AIR pump is commanded OFF it will not run or be activated until the next vehicle start. When the AIR system is inactive, the closed AIR control/shut-off valve prevents air/exhaust flow in either direction.
The AIR system pressure sensor is used to monitor pressure at the AIR control solenoid valve/pressure sensor assembly inlet during the commanded ON/OFF states.
What are the Possible Causes of the DTC P2430 GMC?
- Faulty AIR Pressure Sensor
- AIR Pressure Sensor harness is open or shorted
- AIR Pressure Sensor circuit poor electrical connection
How to Fix the DTC P2430 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2430 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2430 GMC code?
Need more information on how to fix the P2430 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2430 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2430 GMC Code
No Frequently Asked Questions about P2430 GMC Code found.
Discuss the causes and fixes for P2430 GMC OBDII Code
Code P2430 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
