P2423 2013 Nissan Rogue Code - HC Adsorption Catalyst Efficiency Below Threshold Bank 1
Quick Answer
The Engine Control Module (ECM) monitors the phase gap between the heated oxygen sensor 2 signal and the heated oxygen sensor 3 signal. Common causes include Hydro Carbon (HC) adsorption catalyst (under floor), Exhaust tube, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2423 2013 Nissan Rogue indicates HC Adsorption Catalyst Efficiency Below Threshold Bank 1.
- Common causes
- Common causes include Hydro Carbon (HC) adsorption catalyst (under floor), Exhaust tube, Intake air leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2423 2013 Nissan Rogue Description
The phase gap between the heated oxygen sensor 2 signal and the heated oxygen sensor 3 signal becomes small as the Hydrocarbon (HC) adsorption catalyst (underfloor) deteriorates.
When the phase gap between the heated oxygen sensor 2 signal and the heated oxygen sensor 3 signal approaches a specified limit value, the HC adsorption catalyst (underfloor) malfunction is diagnosed.
What are the Possible Causes of the DTC P2423 2013 Nissan Rogue?
- Hydro Carbon (HC) adsorption catalyst (under floor)
- Exhaust tube
- Intake air leaks
- Faulty Fuel injector
- Fuel injector leaks
- Faulty Spark plug
- Improper ignition timing
How to Fix the DTC P2423 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2423 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2423 2013 Nissan Rogue code?
Need more information on how to fix the P2423 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2423 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2423 2013 Nissan Rogue Code
1. What are common symptoms of OBDII code P2423 in a 2013 Nissan Rogue?
The common symptoms of P2423 include the Check Engine Light (CEL) illuminating on the dashboard, reduced engine performance, and potential fuel efficiency issues.
2. What does the OBDII code P2423 "HC Adsorption Catalyst Efficiency Below Threshold Bank 1" mean for a 2013 Nissan Rogue?
This code indicates that the efficiency of the hydrocarbon (HC) adsorption catalyst in Bank 1 is below the acceptable threshold, affecting the vehicle's emissions control system.
3. What are possible causes of the P2423 trouble code in a 2013 Nissan Rogue?
Potential causes of P2423 include a faulty HC adsorption catalyst, damaged oxygen sensors, vacuum leaks, exhaust system leaks, or issues with the evaporative emission control system.
4. How serious is the OBDII code P2423 in a 2013 Nissan Rogue?
While the vehicle may still be operable with this code, it is important to address it promptly to prevent further damage to the emissions control system and ensure compliance with emissions regulations.
5. Can I continue driving my 2013 Nissan Rogue with the P2423 trouble code?
It is not recommended to continue driving the vehicle with the P2423 code illuminated, as prolonged driving with emission control system issues can lead to more severe problems and potential damage to the engine.
6. How can I diagnose and repair the P2423 code in my 2013 Nissan Rogue?
Diagnosing and repairing P2423 typically involves using a diagnostic scanner to pinpoint the issue, inspecting the HC adsorption catalyst and related components, and addressing any faulty parts or leaks in the system.
7. Is it possible to clear the P2423 trouble code in a 2013 Nissan Rogue without fixing the underlying issue?
While clearing the code may temporarily turn off the CEL, the underlying problem causing the code will persist. It is crucial to address the root cause of P2423 to prevent future issues.
8. Can a DIY enthusiast fix the P2423 trouble code in a 2013 Nissan Rogue?
Depending on the DIYer's skill level and access to tools, some may be able to address simpler causes of P2423, such as replacing oxygen sensors or fixing minor vacuum leaks. However, more complex issues may require professional assistance.
9. How much does it typically cost to repair the P2423 code in a 2013 Nissan Rogue?
The cost of repairing P2423 can vary depending on the specific cause of the code and the labor rates in your area. Repairs may range from a few hundred to over a thousand dollars, especially if major components need replacement.
10. Can regular maintenance help prevent the recurrence of the P2423 trouble code in a 2013 Nissan Rogue?
Regular maintenance, such as timely replacement of oxygen sensors, checking for exhaust leaks, and ensuring proper operation of the emissions control system, can help reduce the likelihood of the P2423 code reoccurring in your Nissan Rogue.
Discuss the causes and fixes for P2423 2013 Nissan Rogue OBDII Code
Code P2423 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
