P2419 2006 Toyota Camry Code - Evaporative Emission System Switching Valve Control Circuit Low
Quick Answer
When 5 hours have elapsed after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in Evaporative Emission (EVAP) system. Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2419 2006 Toyota Camry indicates Evaporative Emission System Switching Valve Control Circuit Low.
- Common causes
- Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2419 2006 Toyota Camry Description
What are the Possible Causes of the DTC P2419 2006 Toyota Camry?
- Faulty Vacuum Pump Module
- Vacuum Pump Module harness is open or shorted
- Vacuum Pump Module circuit poor electrical connection.
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2419 2006 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2419 2006 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2419 2006 Toyota Camry code?
Need more information on how to fix the P2419 2006 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2419 2006 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2419 2006 Toyota Camry Code
What does the OBDII code P2419 mean on a 2006 Toyota Camry?
The P2419 code indicates an issue with the Evaporative Emission System Switching Valve Control Circuit, specifically that it is reading low voltage.
What are the common symptoms of code P2419 in a 2006 Toyota Camry?
Symptoms may include the check engine light turning on, a slight decrease in fuel efficiency, or a faint fuel odor near the vehicle.
What causes the P2419 code to be triggered?
The code is often caused by a faulty EVAP switching valve, damaged wiring or connectors in the circuit, or a malfunctioning powertrain control module (PCM).
Can a loose gas cap cause the P2419 code?
No, a loose gas cap typically triggers other EVAP-related codes, but not P2419. This code is specific to the switching valve circuit.
How do you diagnose the P2419 code in a 2006 Toyota Camry?
Diagnosis involves checking the wiring and connectors for damage, testing the EVAP switching valve for proper operation, and using a multimeter to measure circuit voltage.
Is it safe to drive a 2006 Toyota Camry with the P2419 code?
Yes, the car is generally safe to drive short-term, but prolonged driving with this code may lead to increased emissions and reduced fuel efficiency.
What repairs are typically needed to fix the P2419 code?
Repairs may include replacing the EVAP switching valve, repairing or replacing damaged wiring, or addressing issues with the PCM if necessary.
How much does it cost to fix the P2419 code on a 2006 Toyota Camry?
Repair costs vary but typically range from $150 to $400, depending on whether parts like the EVAP switching valve or wiring need replacement.
Can a faulty PCM cause the P2419 code?
While rare, a malfunctioning PCM could cause the P2419 code if it fails to properly control the EVAP switching valve circuit.
Does clearing the P2419 code fix the issue?
Clearing the code might temporarily turn off the check engine light, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P2419 2006 Toyota Camry OBDII Code
Code P2419 2006 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
