AutoCodesAcura – P2413 Acura

P2413 Acura Code - Exhaust Gas Recirculation System Malfunction

Quick Answer

The Exhaust Gas Recirculation (EGR) valve is controlled by the Powertrain Control Module (PCM). Common causes include Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve, EGR Solenoid Valve harness is open or shorted, EGR Solenoid Valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P2413 Acura indicates Exhaust Gas Recirculation System Malfunction.
Common causes
Common causes include Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve, EGR Solenoid Valve harness is open or shorted, EGR Solenoid Valve circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 10,989
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 29, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2413 Acura Description

The Exhaust Gas Recirculation (EGR) valve is controlled by the Powertrain Control Module (PCM). When the EGR valve is open, exhaust gas flows from the exhaust manifold through the EGR valve, the intake manifold, and the EGR passage. The exhaust gas is circulated into the air/fuel mixture to lower the combustion temperatures, reducing oxides of nitrogen (NOx) emissions. A sensor (lift sensor) is built into the EGR valve and detects the amount of valve lift. The command value for the target valve lift is stored in the PCM so that exhaust gas recirculation can be optimized according to driving conditions. Comparing this command value with the lift sensor output signal value, the PCM controls the EGR valve to make the amount of actual valve lift equal to the command value. If the valve sensor output is not enough for the commanded valve lift, a malfunction is detected and a Diagnostic Trouble Code (DTC) is stored.
OBDII Code P2413 Acura - Exhaust Gas Recirculation System Malfunction - AutoCodes.com
P2413 Acura Code - Exhaust Gas Recirculation System Malfunction

What are the Possible Causes of the DTC P2413 Acura?

  • Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve
  • EGR Solenoid Valve harness is open or shorted
  • EGR Solenoid Valve circuit poor electrical connection

How to Fix the DTC P2413 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2413 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2413 Acura code?

Need more information on how to fix the P2413 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2413 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2413 Acura Code

1. What does the OBDII code P2413 mean on an Acura?

P2413 indicates a malfunction in the Exhaust Gas Recirculation (EGR) system, which is responsible for recirculating exhaust gases to reduce emissions.

2. What are the common symptoms of the P2413 code in an Acura?

Symptoms may include the Check Engine Light illuminating, rough idling, reduced fuel efficiency, engine hesitation, or increased NOx emissions.

3. What causes the P2413 code to appear on an Acura?

Common causes include a faulty EGR valve, clogged EGR passages, a malfunctioning EGR sensor, or issues with the EGR control solenoid.

4. Can driving with the P2413 code damage my Acura?

While it may not immediately harm the engine, prolonged driving with this code can lead to increased emissions, decreased performance, and potential engine damage over time.

5. How can I diagnose the P2413 code on my Acura?

Diagnosis typically involves using an OBDII scanner, inspecting the EGR valve and passages for clogs or damage, and testing related sensors and solenoids.

6. How do I fix the P2413 code on an Acura?

Repairs may include cleaning or replacing the EGR valve, clearing clogged passages, replacing a faulty sensor or solenoid, or repairing any related wiring issues.

7. What tools are needed to fix the P2413 code?

You’ll need an OBDII scanner, basic hand tools, and potentially specialized EGR cleaning tools or replacement parts.

8. How much does it cost to repair the P2413 code on an Acura?

Costs can vary, but replacing an EGR valve typically ranges from $150 to $400, including parts and labor.

9. Can a dirty EGR valve cause the P2413 code?

Yes, a dirty or clogged EGR valve is a common cause of this code, as it prevents proper exhaust gas recirculation.

10. Will clearing the P2413 code with a scanner fix the issue?

Clearing the code will turn off the Check Engine Light temporarily, but the underlying problem must be addressed to prevent the code from returning.

Discuss the causes and fixes for P2413 Acura OBDII Code

Code P2413 Acura comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play