P2402 2014 Toyota RAV4 Code - Evaporative Emission Leak Detection Pump Stuck ON
Quick Answer
5 hours after the ignition switch is turned off, the leak detection pump creates negative pressure (vacuum) in the Evaporative Emission (EVAP) system. Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2402 2014 Toyota RAV4 indicates Evaporative Emission Leak Detection Pump Stuck ON.
- Common causes
- Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2402 2014 Toyota RAV4 Description
What are the Possible Causes of the DTC P2402 2014 Toyota RAV4?
- Faulty Canister Pump Module
- Canister Pump Module harness is open or shorted
- Canister Pump Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2402 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2402 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2402 2014 Toyota RAV4 code?
Need more information on how to fix the P2402 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2402 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2402 2014 Toyota RAV4 Code
1. What is the meaning of OBDII code P2402 on a 2014 Toyota RAV4?
- This code indicates a problem with the evaporative emission leak detection pump being stuck ON.
2. What are the common symptoms of a P2402 code in a 2014 Toyota RAV4?
- Common symptoms include the check engine light being illuminated and potential issues with the vehicle's emissions system.
3. What are the possible causes of a P2402 code in a 2014 Toyota RAV4?
- Causes can include a faulty leak detection pump, damaged wiring or connectors, or a malfunctioning EVAP system pressure sensor.
4. How serious is a P2402 code in a 2014 Toyota RAV4?
- While the vehicle may still be operational, it is important to address this code promptly to prevent potential damage to the emissions system and ensure compliance with environmental regulations.
5. Can I continue driving my 2014 Toyota RAV4 with a P2402 code?
- It is generally safe to drive the vehicle for a short period with this code, but it is recommended to have it diagnosed and repaired as soon as possible.
6. How can I diagnose a P2402 code in my 2014 Toyota RAV4?
- Diagnosing this code typically involves using a scan tool to check for the specific fault code, inspecting the components of the EVAP system, and testing the leak detection pump and associated circuits.
7. Is it possible to repair a P2402 code in a 2014 Toyota RAV4 myself?
- While some DIY enthusiasts may attempt to resolve this issue, it is advisable to seek professional help due to the complexity of the EVAP system and the need for specialized tools.
8. What are some common repair tips for fixing a P2402 code in a 2014 Toyota RAV4?
- Repair tips may include checking and replacing the leak detection pump, repairing any damaged wiring or connectors, and clearing the code after the repair is completed.
9. How much does it typically cost to repair a P2402 code in a 2014 Toyota RAV4?
- The cost of repairs can vary depending on the specific cause of the code, but it may involve parts replacement, labor costs, and diagnostic fees, which could range from a few hundred to over a thousand dollars.
10. How can I prevent a P2402 code from recurring in my 2014 Toyota RAV4?
- To prevent the code from reoccurring, it is essential to perform regular maintenance on the EVAP system, address any issues promptly, and follow the manufacturer's recommended service schedule for your vehicle.
Discuss the causes and fixes for P2402 2014 Toyota RAV4 OBDII Code
Code P2402 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
