P2400 KIA Code - Evaporative Emission System Leak Detection Pump Control Circuit/Open
Quick Answer
The DM-TL (Diagnostic Module Tank Leakage) is used to monitor the evaporative system for leaks. Common causes include Faulty Diagnostic Module Tank Leakage (DM-TL), Diagnostic Module Tank Leakage harness is open or shorted, Diagnostic Module Tank Leakage circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2400 KIA indicates Evaporative Emission System Leak Detection Pump Control Circuit/Open.
- Common causes
- Common causes include Faulty Diagnostic Module Tank Leakage (DM-TL), Diagnostic Module Tank Leakage harness is open or shorted, Diagnostic Module Tank Leakage circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2400 KIA Description
What are the Possible Causes of the DTC P2400 KIA?
- Faulty Diagnostic Module Tank Leakage (DM-TL)
- Diagnostic Module Tank Leakage harness is open or shorted
- Diagnostic Module Tank Leakage circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2400 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2400 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2400 KIA code?
Need more information on how to fix the P2400 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2400 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2400 KIA Code
1. What does the OBDII code P2400 mean on a KIA?
P2400 indicates an issue with the Evaporative Emission System Leak Detection Pump Control Circuit, specifically an open circuit or failure in the system.
2. What are the common symptoms of code P2400 in a KIA?
Common symptoms include an illuminated Check Engine Light, potential fuel odor near the vehicle, and failed emissions testing.
3. What causes the P2400 code to appear in a KIA?
The most common causes are a faulty leak detection pump, damaged wiring or connectors in the pump circuit, or a failed control module.
4. Can a loose gas cap trigger the P2400 code on a KIA?
No, a loose gas cap is unlikely to trigger P2400; it is more specific to the leak detection pump circuit rather than general EVAP leaks.
5. How do you diagnose the P2400 code on a KIA?
Diagnosis typically involves inspecting the leak detection pump, checking for damaged wiring or connectors, and using a multimeter to test circuit continuity.
6. Is it safe to drive with a P2400 code on a KIA?
While the vehicle may remain drivable, prolonged driving with this code can lead to increased emissions and potential damage to the EVAP system.
7. How much does it cost to fix the P2400 code on a KIA?
Repairs can range from $100 to $500 depending on whether the issue is a wiring repair, pump replacement, or module replacement.
8. Can the P2400 code clear itself on a KIA?
The code will not clear itself unless the underlying issue is fixed. After repairs, the code can be cleared using an OBDII scanner.
9. What tools are needed to fix a P2400 code on a KIA?
Common tools include an OBDII scanner, multimeter, and possibly a wiring repair kit or replacement leak detection pump.
10. What can prevent a P2400 code from recurring in a KIA?
Regular maintenance of the EVAP system, ensuring connectors are secure, and promptly addressing any related issues can help prevent recurrence.
Discuss the causes and fixes for P2400 KIA OBDII Code
Code P2400 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
