P2338 Dodge Code - Cylinder 3 Above Knock Threshold
Quick Answer
The Knock Sensor (KS) senses engine knocking (also known as detonation or pinging) using a piezoelectric element. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2338 Dodge indicates Cylinder 3 Above Knock Threshold.
- Common causes
- Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2338 Dodge Description
What are the Possible Causes of the DTC P2338 Dodge?
- Faulty knock sensor
- Knock sensor circuit poor electrical connection
- Knock sensor harness is open or shorted
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2338 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2338 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2338 Dodge code?
Need more information on how to fix the P2338 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2338 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2338 Dodge Code
1. What does the OBDII code P2338 mean on a Dodge vehicle?
P2338 indicates that the knock sensor has detected that cylinder 3 is experiencing higher-than-normal knock levels, which could signal improper combustion.
2. What are the common symptoms of code P2338 in a Dodge?
Symptoms may include engine knocking noises, reduced engine performance, poor fuel efficiency, hesitation during acceleration, or the Check Engine Light turning on.
3. What causes the P2338 code to appear?
Common causes include a faulty knock sensor, incorrect ignition timing, low-quality fuel, worn spark plugs, failing ignition coils, or carbon buildup in the combustion chamber.
4. Can I drive my Dodge with the P2338 code?
While it may be possible to drive, it’s not recommended as prolonged knocking can damage the engine over time. Address the issue promptly to avoid costly repairs.
5. How is the P2338 code diagnosed?
A mechanic will typically use a scan tool to confirm the code, inspect the knock sensor and wiring, check ignition components, and verify the fuel quality and engine timing.
6. What repairs can fix the P2338 code on a Dodge?
Repairs may include replacing the knock sensor, cleaning or replacing spark plugs, repairing ignition coils, using higher-octane fuel, or addressing carbon buildup in the engine.
7. Can bad fuel cause the P2338 code?
Yes, using low-octane or contaminated fuel can lead to engine knock, triggering the P2338 code. Switching to higher-quality fuel may help resolve the issue.
8. How much does it cost to fix the P2338 code?
Repair costs vary depending on the issue. Replacing a knock sensor typically costs $150–$400, while ignition system repairs or carbon cleaning may cost more.
9. Can a dirty air filter cause the P2338 code?
While unlikely, a severely clogged air filter can affect air-fuel mixture and combustion, potentially contributing to engine knock.
10. Is it necessary to reset the code after repairs?
Yes, after completing repairs, use a scan tool to clear the P2338 code and monitor if it returns to ensure the issue is resolved.
Discuss the causes and fixes for P2338 Dodge OBDII Code
Code P2338 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
