P2336 Dodge Code - Cylinder 1 Above Knock Threshold
Quick Answer
The Knock Sensor (KS) senses engine knocking (also known as detonation or pinging) using a piezoelectric element. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2336 Dodge indicates Cylinder 1 Above Knock Threshold.
- Common causes
- Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2336 Dodge Description
What are the Possible Causes of the DTC P2336 Dodge?
- Faulty knock sensor
- Knock sensor circuit poor electrical connection
- Knock sensor harness is open or shorted
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2336 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2336 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2336 Dodge code?
Need more information on how to fix the P2336 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2336 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2336 Dodge Code
1. What does code P2336 mean on a Dodge vehicle?
Code P2336 indicates that the ECM has detected cylinder 1 experiencing a knock or detonation above the allowable threshold.
2. What are the common symptoms of a P2336 code?
Symptoms may include engine knocking noises, reduced engine performance, poor fuel economy, and potential misfiring.
3. What causes the P2336 code to appear?
Common causes include faulty knock sensors, a damaged knock sensor wiring harness, incorrect fuel octane levels, carbon buildup in the cylinder, or a malfunctioning ECM.
4. Can I drive my Dodge with a P2336 code?
Driving with this code is not recommended as excessive knocking can cause serious engine damage over time.
5. How is the P2336 code diagnosed?
A mechanic will use an OBDII scanner to confirm the code, inspect the knock sensor and wiring, check for carbon deposits, and test the ignition and fuel systems.
6. What repairs can fix the P2336 code?
Repairs may include replacing the knock sensor, cleaning carbon buildup, repairing or replacing damaged wiring, or reprogramming/updating the ECM.
7. Can a bad knock sensor cause a P2336 code?
Yes, a faulty or failing knock sensor is a common cause of this code.
8. Does using the wrong fuel octane trigger the P2336 code?
Yes, using a lower octane fuel than recommended for your Dodge vehicle can lead to engine knock and trigger this code.
9. How much does it cost to repair a P2336 code?
The cost varies depending on the cause but typically ranges from $100 to $400 for sensor replacement or wiring repairs.
10. Can a dirty air filter contribute to a P2336 code?
While less common, a restricted airflow due to a dirty air filter can affect combustion and potentially contribute to knocking issues.
Discuss the causes and fixes for P2336 Dodge OBDII Code
Code P2336 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
