AutoCodes – Jeep – P2314 Jeep

P2314 Jeep Code - Ignition Coil 'E' Secondary Circuit

Quick Answer

The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. Common causes include Faulty Ignition Coil 'E', Ignition Coil 'E' harness is open or shorted, Ignition Coil 'E' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2314 Jeep indicates Ignition Coil 'E' Secondary Circuit.
Common causes: Common causes include Faulty Ignition Coil 'E', Ignition Coil 'E' harness is open or shorted, Ignition Coil 'E' circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,326

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2314 Jeep Description

The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. When the ignition coil driver is switched on, current rapidly builds up to a maximum value, determined by the coil inductance and resistance. When the current is switched off, the magnetic field collapses which induces a secondary high voltage surge and the spark plug is fired. This high voltage surge creates a flyback voltage which the PCM uses as a feedback during the ignition diagnostics. The PCM continuously monitors the ignition system for concerns. The P2307 code sets when the PCM detects a short to voltage in the circuit.

OBDII Code P2314 Jeep - Ignition Coil 'E' Secondary Circuit - AutoCodes.com — P2314 Jeep Code - Ignition Coil 'E' Secondary Circuit

What does this mean?

What are the Possible Causes of the DTC P2314 Jeep?

Faulty Ignition Coil 'E'
Ignition Coil 'E' harness is open or shorted
Ignition Coil 'E' circuit poor electrical connection

How to Fix the DTC P2314 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2314 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2314 Jeep code?

Need more information on how to fix the P2314 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2314 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2314 Jeep Code

1. What are the common symptoms of OBDII code P2314 in a Jeep related to the Ignition Coil 'E' Secondary Circuit?

- Common symptoms include engine misfires, rough idling, lack of power, and illuminated check engine light.

2. What are the typical causes of the OBDII code P2314 in a Jeep related to the Ignition Coil 'E' Secondary Circuit?

- The code P2314 is often triggered by a faulty ignition coil, damaged wiring or connectors, or a problem with the Engine Control Module (ECM).

3. How can I diagnose the issue causing the OBDII code P2314 in my Jeep related to the Ignition Coil 'E' Secondary Circuit?

- You can start by inspecting the ignition coil, checking the wiring and connectors for damage, and performing a continuity test to identify any issues.

4. Can a bad spark plug cause the OBDII code P2314 in a Jeep related to the Ignition Coil 'E' Secondary Circuit?

- Yes, a faulty spark plug can cause the ignition coil to malfunction, leading to the triggering of code P2314. It's recommended to inspect and replace spark plugs if necessary.

5. What are some repair tips for fixing the OBDII code P2314 in a Jeep related to the Ignition Coil 'E' Secondary Circuit?

- Repair tips include replacing the faulty ignition coil, repairing any damaged wiring or connectors, and resetting the ECM after the repairs are completed.

6. Is it safe to continue driving my Jeep with the OBDII code P2314 related to the Ignition Coil 'E' Secondary Circuit?

- It is not recommended to drive your vehicle with code P2314 as it can lead to further engine damage and decreased performance. It's best to address the issue promptly.

7. Can a DIY enthusiast fix the OBDII code P2314 in a Jeep related to the Ignition Coil 'E' Secondary Circuit?

- Depending on your skill level and access to tools, a DIY enthusiast can attempt to diagnose and fix the issue. However, if unsure, it's best to seek professional help.

8. How much does it typically cost to repair the OBDII code P2314 in a Jeep related to the Ignition Coil 'E' Secondary Circuit?

- The cost of repairs can vary based on the extent of the issue and whether you do the repairs yourself or take your Jeep to a mechanic. Costs may range from $100 to $300 or more.

9. Can a disconnected or loose battery cause the OBDII code P2314 in a Jeep related to the Ignition Coil 'E' Secondary Circuit?

- Yes, a disconnected or loose battery can cause the ECM to reset and trigger various fault codes, including P2314. Ensure your battery is securely connected before diagnosing further.

10. Are there any preventive maintenance tips to avoid encountering the OBDII code P2314 related to the Ignition Coil 'E' Secondary Circuit in a Jeep?

- Regularly servicing your ignition system, including checking and replacing spark plugs and ignition coils as needed, can help prevent issues that may lead to code P2314.