P2304 Chrysler Code - Ignition Coil 'B' Primary Control Circuit High
Quick Answer
The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. Common causes include Faulty Ignition Coil 'B', Ignition Coil 'B' harness is open or shorted, Ignition Coil 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2304 Chrysler indicates Ignition Coil 'B' Primary Control Circuit High.
- Common causes
- Common causes include Faulty Ignition Coil 'B', Ignition Coil 'B' harness is open or shorted, Ignition Coil 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2304 Chrysler Description
What are the Possible Causes of the DTC P2304 Chrysler?
- Faulty Ignition Coil 'B'
- Ignition Coil 'B' harness is open or shorted
- Ignition Coil 'B' circuit poor electrical connection
How to Fix the DTC P2304 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2304 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2304 Chrysler code?
Need more information on how to fix the P2304 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2304 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2304 Chrysler Code
1. What are the common symptoms of OBDII code P2304 in a Chrysler vehicle?
- Common symptoms include engine misfire, rough idling, loss of power, and illuminated Check Engine Light.
2. What does the OBDII code P2304 Chrysler indicate about the Ignition Coil 'B' Primary Control Circuit?
- The code indicates a high voltage condition in the primary control circuit of the ignition coil for cylinder 'B'.
3. What are the possible causes of the Ignition Coil 'B' Primary Control Circuit High code (P2304) in a Chrysler?
- Possible causes include a faulty ignition coil, damaged wiring or connectors, a problem with the Engine Control Module (ECM), or a short circuit.
4. How can I diagnose the cause of OBDII code P2304 in my Chrysler vehicle?
- You can use a multimeter to test the ignition coil, inspect the wiring for damage, check connectors for corrosion, and perform a thorough visual inspection of the components.
5. Can driving with the OBDII code P2304 Chrysler cause further damage to the vehicle?
- Driving with this code may lead to decreased fuel efficiency, engine performance issues, and potential damage to the catalytic converter over time.
6. Is it safe to continue driving my Chrysler with the Ignition Coil 'B' Primary Control Circuit High code active?
- It is not recommended to drive the vehicle with this code present, as it can lead to further engine problems and potential breakdowns.
7. How can I repair the Ignition Coil 'B' Primary Control Circuit High code (P2304) in my Chrysler?
- The repair typically involves replacing the faulty ignition coil, repairing any damaged wiring or connectors, and clearing the code with a diagnostic tool.
8. Are there any preventive measures to avoid OBDII code P2304 in a Chrysler?
- Regular maintenance, such as timely spark plug replacements and ignition system checks, can help prevent issues that lead to this code.
9. Can a DIY enthusiast fix the Ignition Coil 'B' Primary Control Circuit High code (P2304) in a Chrysler?
- Depending on their skill level, a DIY enthusiast may be able to diagnose and replace the faulty ignition coil or repair wiring issues associated with this code.
10. How much does it typically cost to repair the OBDII code P2304 in a Chrysler at a professional auto repair shop?
- The cost can vary depending on the exact cause of the code, but it may range from $100-$300 for parts and labor.
Discuss the causes and fixes for P2304 Chrysler OBDII Code
Code P2304 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
