P2303 Chrysler Code - Ignition Coil 'B' Primary Control Circuit Low
Quick Answer
The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. Common causes include Faulty Ignition Coil 'B', Ignition Coil 'B' harness is open or shorted, Ignition Coil 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2303 Chrysler indicates Ignition Coil 'B' Primary Control Circuit Low.
- Common causes
- Common causes include Faulty Ignition Coil 'B', Ignition Coil 'B' harness is open or shorted, Ignition Coil 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2303 Chrysler Description
What are the Possible Causes of the DTC P2303 Chrysler?
- Faulty Ignition Coil 'B'
- Ignition Coil 'B' harness is open or shorted
- Ignition Coil 'B' circuit poor electrical connection
How to Fix the DTC P2303 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2303 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2303 Chrysler code?
Need more information on how to fix the P2303 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2303 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2303 Chrysler Code
1. What are the common symptoms of OBDII code P2303 in a Chrysler vehicle?
- Common symptoms include engine misfires, rough idling, loss of power, and illuminated Check Engine Light.
2. What does the OBDII code P2303 indicating "Ignition Coil 'B' Primary Control Circuit Low" mean for a Chrysler car?
- This code indicates a problem with the primary control circuit of the ignition coil 'B', which can lead to ignition system issues.
3. What are the possible causes of OBDII code P2303 in a Chrysler vehicle?
- Possible causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, or issues with the engine control module.
4. How can I diagnose the source of OBDII code P2303 in my Chrysler car?
- Diagnose by visually inspecting the ignition coil and its wiring, checking for loose connections, testing the ignition coil resistance, and using a scan tool to monitor the circuit.
5. Can driving with OBDII code P2303 cause further damage to my Chrysler vehicle?
- Continuing to drive with this code may lead to poor engine performance, reduced fuel efficiency, and potential damage to the catalytic converter over time.
6. Is it safe to ignore OBDII code P2303 in my Chrysler vehicle?
- Ignoring this code can result in persistent engine issues and may lead to more severe problems with the ignition system, so it's recommended to address it promptly.
7. How can I repair OBDII code P2303 in my Chrysler car?
- Repair options include replacing the faulty ignition coil, repairing damaged wiring or connectors, and resetting the fault code using a scan tool after the fix.
8. Are there any preventive maintenance tips to avoid OBDII code P2303 in a Chrysler vehicle?
- Regularly inspecting and maintaining the ignition system components, such as ignition coils and wiring, can help prevent issues that trigger this code.
9. Can a DIY enthusiast fix OBDII code P2303 in a Chrysler vehicle, or is professional help necessary?
- Depending on your skill level and access to tools, DIY enthusiasts can address this code by following repair guides, but seeking professional help is advisable if unsure.
10. How long does it typically take to resolve OBDII code P2303 in a Chrysler car?
- The repair time can vary based on the exact cause of the code, but in most cases, diagnosing and fixing the issue can be done within a few hours by a qualified technician.
Discuss the causes and fixes for P2303 Chrysler OBDII Code
Code P2303 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
