P2293 GMC Code - Fuel Pressure Regulator 2 Performance
Quick Answer
The fuel rail pressure sensor detects fuel pressure within the fuel rail. Common causes include Faulty Fuel Rail Pressure Sensor, High Pressure Fuel Pump harness is open or shorted, High Pressure Fuel Pump electrical circuit poor connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2293 GMC indicates Fuel Pressure Regulator 2 Performance.
- Common causes
- Common causes include Faulty Fuel Rail Pressure Sensor, High Pressure Fuel Pump harness is open or shorted, High Pressure Fuel Pump electrical circuit poor connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2293 GMC Description
High pressure fuel is regulated by the high-pressure fuel pump actuator, which is a part of the high-pressure fuel pump. The high-pressure fuel pump actuator is a solenoid valve. The ECM provides a voltage on the actuator high control circuit and ground on the actuator low control circuit. Both circuits are controlled through output drivers within the ECM. When deactivated, both drivers are disabled. When activated, the high control circuit driver energizes the high-pressure fuel pump actuator, and the low control circuit driver Pulse-Width Modulates (PWM) the low control circuit to ground.
The high-pressure mechanical fuel pump is driven by three lobes on the camshaft. The ECM uses the camshaft and crankshaft position sensor inputs to synchronize the high-pressure fuel pump actuator with the position of each of the camshaft lobes. The ECM regulates fuel pressure by adjusting the portion of each pump stroke that provides fuel to the rail.
The ECM monitors the fuel rail fuel pressure sensor and the high-pressure fuel pump actuator to determine if the commanded and actual pressure are within a predetermined range, or if the amount of fuel pressure correction exceeds a calibrated pressure.
The Diagnostic Trouble Code (DTC) will set if the actual fuel rail pressure is not within a calibrated range for greater than 5 s.
What are the Possible Causes of the DTC P2293 GMC?
- Faulty Fuel Rail Pressure Sensor
- High Pressure Fuel Pump harness is open or shorted
- High Pressure Fuel Pump electrical circuit poor connection
- Faulty High Pressure Fuel Pump
How to Fix the DTC P2293 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2293 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2293 GMC code?
Need more information on how to fix the P2293 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2293 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2293 GMC Code
1. What does the OBDII code P2293 GMC indicate?
The code P2293 GMC indicates a problem with Fuel Pressure Regulator 2 Performance.
2. What are common symptoms of a P2293 GMC code?
Common symptoms of a P2293 GMC code include rough idling, decreased fuel efficiency, and loss of power during acceleration.
3. What are possible causes of a P2293 GMC code?
Possible causes of a P2293 GMC code include a faulty fuel pressure regulator, clogged fuel filter, fuel pump issues, or a vacuum leak.
4. How can I diagnose a P2293 GMC code?
Diagnosing a P2293 GMC code involves using a scan tool to read the code, checking the fuel pressure with a gauge, inspecting the fuel system components, and looking for any visible signs of damage or leaks.
5. Can I continue to drive my vehicle with a P2293 GMC code?
It is not recommended to drive your vehicle with a P2293 GMC code as it can lead to further damage to the fuel system and decreased engine performance.
6. How can I repair a P2293 GMC code?
Repairing a P2293 GMC code may involve replacing the fuel pressure regulator, cleaning or replacing the fuel filter, checking and repairing the fuel pump, and fixing any vacuum leaks in the system.
7. Will resetting the OBDII system clear a P2293 GMC code?
Resetting the OBDII system may temporarily clear the code, but it will likely return if the underlying issue causing the P2293 GMC code is not addressed.
8. How much does it cost to fix a P2293 GMC code?
The cost to fix a P2293 GMC code can vary depending on the specific issue causing the code, but it may range from $100 to $500 or more, including parts and labor.
9. Can a DIY enthusiast repair a P2293 GMC code?
Depending on your skill level and access to tools, a DIY enthusiast may be able to repair a P2293 GMC code by following repair guides and instructions, but it is recommended to seek professional help if unsure.
10. How can I prevent a P2293 GMC code from occurring?
To prevent a P2293 GMC code, it is important to perform regular maintenance on your vehicle, including changing the fuel filter as recommended, using high-quality fuel, and addressing any fuel system issues promptly.
Discuss the causes and fixes for P2293 GMC OBDII Code
Code P2293 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
