AutoCodes – Dodge – P2286 Dodge

P2286 Dodge Code - Injector Control Pressure Sensor Circuit High

Quick Answer

The Powertrain Control Module (PCM) monitors the Injector Control Pressure (ICP) sensor. Common causes include Faulty Injector Control Pressure (ICP) sensor, Injector Control Pressure (ICP) sensor harness is open or shorted, Injector Control Pressure (ICP) sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2286 Dodge indicates Injector Control Pressure Sensor Circuit High.
Common causes: Common causes include Faulty Injector Control Pressure (ICP) sensor, Injector Control Pressure (ICP) sensor harness is open or shorted, Injector Control Pressure (ICP) sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,157

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2286 Dodge Description

The Powertrain Control Module (PCM) monitors the Injector Control Pressure (ICP) sensor. The code sets when the signal from the sensor is out of factory specifications, and the PCM will go to open loop control of injection control pressure (operate from an estimated injection control pressure).
The ICP sensor is a variable capacitance sensor that, when supplied with a 5-volts reference signal from the PCM, produces a linear analog voltage signal that indicates pressure.
The ICP sensor's primary function is to provide a feedback signal to indicate rail pressure so that the PCM con command the correct injector timing and pulse width and the correct injection control pressure for the proper fuel delivery at all speed and load conditions.

OBDII Code P2286 Dodge - Injector Control Pressure Sensor Circuit High - AutoCodes.com — P2286 Dodge Code - Injector Control Pressure Sensor Circuit High

What does this mean?

What are the Possible Causes of the DTC P2286 Dodge?

Faulty Injector Control Pressure (ICP) sensor
Injector Control Pressure (ICP) sensor harness is open or shorted
Injector Control Pressure (ICP) sensor circuit poor electrical connection

How to Fix the DTC P2286 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2286 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2286 Dodge code?

Need more information on how to fix the P2286 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2286 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2286 Dodge Code

1. What does the OBDII code P2286 mean on a Dodge?

P2286 indicates that the Injector Control Pressure (ICP) Sensor Circuit is reading a voltage higher than the expected range, which can affect fuel injection performance.

2. What are the common symptoms of code P2286?

Symptoms include rough idling, poor acceleration, decreased fuel efficiency, engine misfires, and possibly the engine failing to start.

3. What causes code P2286 to appear?

Possible causes include a faulty ICP sensor, damaged or corroded wiring in the sensor circuit, a malfunctioning fuel injector control module, or a high-pressure fuel system issue.

4. Can I drive my Dodge with code P2286 active?

While the vehicle may still run, driving with this code active can lead to poor performance and potential engine damage. It’s best to address the issue promptly.

5. How do I diagnose code P2286 on my Dodge?

Start by inspecting the wiring and connectors for the ICP sensor, checking for damage or corrosion. Use a multimeter to test the sensor’s voltage output and compare it to manufacturer specifications.

6. How do I fix code P2286 on a Dodge?

Repairs may include replacing the ICP sensor, repairing or replacing damaged wiring, cleaning connectors, or addressing issues with the high-pressure fuel system.

7. How much does it cost to fix code P2286?

The cost depends on the specific repair. Replacing an ICP sensor typically costs $200–$400, while wiring repairs or fuel system work can vary widely.

8. Can a bad ICP sensor cause starting problems?

Yes, a faulty ICP sensor can cause hard starting or prevent the engine from starting altogether due to incorrect fuel injection pressure readings.

9. Will clearing the code fix P2286?

Clearing the code will remove it temporarily, but if the underlying issue isn’t resolved, the code will likely return.

10. What tools do I need to diagnose and fix P2286?

Common tools include an OBDII scanner, a multimeter, and basic hand tools. In some cases, specialized diagnostic tools for the fuel system may be needed.