P2278 Dodge Code - O2 Sensor Signals Swapped Bank 1 Sensor 3/Bank 2 Sensor 3
Quick Answer
P2278 Dodge indicates O2 Sensor Signals Swapped Bank 1 Sensor 3/Bank 2 Sensor 3. Common causes include Faulty O2 Sensor, O2 Sensor harness is open or shorted, O2 Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2278 Dodge indicates O2 Sensor Signals Swapped Bank 1 Sensor 3/Bank 2 Sensor 3.
- Common causes
- Common causes include Faulty O2 Sensor, O2 Sensor harness is open or shorted, O2 Sensor circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P2278 Dodge Description
What are the Possible Causes of the DTC P2278 Dodge?
- Faulty O2 Sensor
- O2 Sensor harness is open or shorted
- O2 Sensor circuit poor electrical connection
How to Fix the DTC P2278 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2278 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2278 Dodge code?
Need more information on how to fix the P2278 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2278 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2278 Dodge Code
What does the OBDII code P2278 mean for a Dodge vehicle?
Code P2278 indicates that the signals from the oxygen sensors (Bank 1 Sensor 3 and Bank 2 Sensor 3) have been swapped or incorrectly aligned, causing improper readings.
What are common symptoms of code P2278 in Dodge vehicles?
Symptoms may include decreased fuel efficiency, increased emissions, poor engine performance, and a check engine light.
What causes code P2278 in Dodge vehicles?
The code can be caused by incorrect wiring, faulty oxygen sensors, swapped sensor connections, or a malfunctioning PCM (Powertrain Control Module).
Can I drive my Dodge with code P2278?
While the vehicle may still be drivable, ignoring the code can lead to further engine performance issues and increased emissions. Prompt diagnosis and repair are recommended.
How do I diagnose code P2278 in a Dodge vehicle?
Start by inspecting the wiring and connections for Bank 1 Sensor 3 and Bank 2 Sensor 3. Verify the sensor locations and ensure they are not swapped. Use a scan tool to monitor sensor outputs.
What is the function of Bank 1 Sensor 3 and Bank 2 Sensor 3?
These sensors monitor the oxygen levels in the exhaust gases to help the PCM regulate fuel mixture and improve engine efficiency.
What repairs can fix code P2278 in Dodge vehicles?
Repairs may include correcting swapped sensor wiring, replacing faulty oxygen sensors, repairing damaged wiring, or updating/reprogramming the PCM.
How much does it cost to fix code P2278 on a Dodge?
Repair costs vary but typically range from $150 to $300 for parts and labor, depending on whether sensors or wiring need replacement.
Can a faulty PCM cause code P2278?
Yes, a malfunctioning PCM can misinterpret sensor signals, leading to the code. However, this is less common compared to wiring or sensor issues.
How can I prevent code P2278 from recurring in my Dodge?
Ensure proper installation of oxygen sensors, regularly inspect wiring for damage, and address any exhaust system issues promptly.
Discuss the causes and fixes for P2278 Dodge OBDII Code
Code P2278 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
