AutoCodes – Dodge – P2261 Dodge

P2261 Dodge Code - Turbocharger/Supercharger Bypass Valve - Mechanical

Quick Answer

The Variable Geometry Turbocharger (VGT) is electronically activated by the Electronic Turbo Actuator. Common causes include Engine Control Module (ECM) calibration update, Soot build up on turbocharger, Faulty turbocharger. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2261 Dodge indicates Turbocharger/Supercharger Bypass Valve - Mechanical.
Common causes: Common causes include Engine Control Module (ECM) calibration update, Soot build up on turbocharger, Faulty turbocharger.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,251

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2261 Dodge Description

The Variable Geometry Turbocharger (VGT) is electronically activated by the Electronic Turbo Actuator. The Electronic Turbo Actuator is a smart device and receives information via the CAN BUS from the Engine Control Module (ECM). The Electronic Turbo Actuator performs its own diagnostics and reports failures back to the ECM using the CAN BUS. The ECM then decodes the error message and converts it to a fault code. The ECM turns on the MIL lamp after the diagnostic runs and fails in two consecutive drive cycles. The ECM will turn off the MIL lamp after this diagnostic runs and passes in four consecutive drive cycles.

OBDII Code P2261 Dodge - Turbocharger/Supercharger Bypass Valve - Mechanical - AutoCodes.com — P2261 Dodge Code - Turbocharger/Supercharger Bypass Valve - Mechanical

What does this mean?

What are the Possible Causes of the DTC P2261 Dodge?

Engine Control Module (ECM) calibration update
Soot build up on turbocharger
Faulty turbocharger

How to Fix the DTC P2261 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2261 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2261 Dodge code?

Need more information on how to fix the P2261 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2261 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2261 Dodge Code

What does the OBDII code P2261 mean on a Dodge vehicle?

1. P2261 indicates an issue with the turbocharger or supercharger bypass valve, specifically a mechanical malfunction that prevents proper operation. 2.

What are the common symptoms of code P2261 in a Dodge?

Symptoms may include reduced engine performance, turbo lag, a check engine light, hissing noises from the engine, or poor fuel efficiency. 3.

What causes the P2261 code to appear in a Dodge?

Common causes include a stuck or damaged bypass valve, vacuum line leaks, faulty solenoids, or mechanical blockages in the bypass valve system. 4.

Can I drive my Dodge with code P2261?

While the vehicle may still be drivable, continued use can lead to engine strain, reduced turbocharger efficiency, and potential damage to related components. 5.

How is the P2261 code diagnosed in a Dodge?

A mechanic will inspect the bypass valve, check for vacuum leaks, test the solenoid, and use a scan tool to monitor live data and confirm the malfunction. 6.

How can I fix the P2261 code on my Dodge?

Repairs may involve cleaning or replacing the bypass valve, repairing vacuum leaks, replacing a faulty solenoid, or addressing wiring or control module issues. 7.

Is a faulty bypass valve the only reason for the P2261 code?

No, other potential issues include solenoid failure, blocked vacuum lines, or wiring and electrical problems affecting the turbocharger system. 8.

How much does it cost to repair the P2261 code on a Dodge?

Repair costs vary but typically range from $150 to $500, depending on whether cleaning, valve replacement, or additional repairs are needed. 9.

Can a dirty air filter cause the P2261 code in a Dodge?

While unlikely, a severely clogged air filter can indirectly affect turbocharger performance, which might exacerbate issues related to the bypass valve. 10.

How can I prevent the P2261 code from reoccurring in my Dodge?

Regular maintenance of the turbocharger system, checking vacuum lines, and addressing any engine issues promptly can help prevent this code from returning.