AutoCodes – Toyota – P2253 2009 Toyota Prius

P2253 2009 Toyota Prius Code - Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1

Quick Answer

The Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio. Common causes include Faulty Air/Fuel Sensor Bank 1, Air/Fuel Sensor Bank 1 harness is open or shorted, Air/Fuel Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P2253 2009 Toyota Prius indicates Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1.
Common causes: Common causes include Faulty Air/Fuel Sensor Bank 1, Air/Fuel Sensor Bank 1 harness is open or shorted, Air/Fuel Sensor Bank 1 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,720

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2253 2009 Toyota Prius Description

The Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio.
The A/F sensor output voltage is used to provide feedback for the Engine Control Module (ECM) to control the air-fuel ratio.
With the A/F sensor output, the ECM can determine deviation from the stoichiometric air-fuel ratio and control proper injection time. If the A/F sensor is malfunctioning, the ECM is unable to accurately control air-fuel ratio.
The A/F sensor is equipped with a heater which heats the zirconia element. The heater is also controlled by the ECM. When the intake air volume is low (the temperature of the exhaust gas is low), current flows to the heater which heats the sensor to facilitate detection of accurate oxygen concentration.
The A/F sensor is a planar type. Compared to a conventional type, the sensor and heater portions are narrower. Because the heat of the heater is conducted through the alumina to zirconia (of the sensor portion), sensor activation is accelerated.

The code is output when there is an open or short in the A/F sensor circuit, or if A/F sensor output drops. To detect these problems, the voltage of the A/F sensor is monitored when turning the ignition switch to the ON position, and the admittance (admittance is an electrical term that indicates the ease of flow of current) is checked while driving. If the voltage of the A/F sensor is between 0.6 V and 4.5 V, it is considered normal. If the voltage is outside of the specified range, or the admittance is less than the standard value, the ECM will determine that there is a malfunction in the A/F sensor. If the same malfunction is detected in the next driving cycle, the MIL is illuminated and a DTC is set.

OBDII Code P2253 2009 Toyota Prius - Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1 - AutoCodes.com — P2253 2009 Toyota Prius Code - Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P2253 2009 Toyota Prius?

Faulty Air/Fuel Sensor Bank 1
Air/Fuel Sensor Bank 1 harness is open or shorted
Air/Fuel Sensor Bank 1 circuit poor electrical connection
Air/Fuel Sensor Relay
Faulty Engine Control Module (ECM)

How to Fix the DTC P2253 2009 Toyota Prius?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2253 2009 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2253 2009 Toyota Prius code?

Need more information on how to fix the P2253 2009 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2253 2009 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2253 2009 Toyota Prius Code

1. What are the common symptoms of OBDII code P2253 in a 2009 Toyota Prius?

The common symptoms of OBDII code P2253 include poor engine performance, reduced fuel efficiency, and the illumination of the Check Engine light on the dashboard.

2. What does the Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1 error code mean for a 2009 Toyota Prius?

The P2253 code indicates a high voltage condition in the reference ground circuit of the oxygen (A/F) sensor located before the catalytic converter on bank 1 of the engine.

3. What are the possible causes of the Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1 code in a 2009 Toyota Prius?

Potential causes of code P2253 include a faulty oxygen (A/F) sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).

4. How can I diagnose and repair OBDII code P2253 in my 2009 Toyota Prius?

To diagnose and repair code P2253, you can start by inspecting the wiring and connectors related to the bank 1 sensor 1 oxygen (A/F) sensor. If no visible issues are found, testing the sensor's voltage and resistance may help pinpoint the problem.

5. Can driving with the P2253 code present cause further damage to my 2009 Toyota Prius?

Continuing to drive with the P2253 code present may lead to decreased fuel efficiency and potentially cause damage to the catalytic converter over time. It is recommended to address the issue promptly.

6. Is it safe to continue driving my 2009 Toyota Prius with the Check Engine light on due to code P2253?

While the vehicle may still be operable with the Check Engine light on, it is advisable to address the underlying cause of code P2253 to prevent any potential engine performance issues or damage.

7. How much does it typically cost to repair OBDII code P2253 in a 2009 Toyota Prius?

The cost of repairing code P2253 can vary depending on the root cause of the issue. Costs may include replacing the oxygen (A/F) sensor, repairing wiring or connectors, or addressing ECM problems. It's best to consult a mechanic for an accurate estimate.

8. Can I reset the Check Engine light after repairing the Oxygen A/F Sensor Reference Ground Circuit High Bank 1 Sensor 1 issue in my 2009 Toyota Prius?

After repairing the underlying cause of code P2253, you can reset the Check Engine light using an OBDII scanner or by disconnecting the car battery for a few minutes to clear the stored error code.

9. How often should the oxygen (A/F) sensor be replaced in a 2009 Toyota Prius to prevent OBDII code P2253 from recurring?

The oxygen (A/F) sensor should be inspected and replaced as needed based on the manufacturer's recommended maintenance schedule or if symptoms of a failing sensor, like code P2253, arise.

10. Can a DIY enthusiast with basic automotive knowledge repair OBDII code P2253 in a 2009 Toyota Prius?

While diagnosing and repairing code P2253 may be challenging for a DIY enthusiast, individuals with basic automotive knowledge and the right tools can attempt to address simpler causes like damaged wiring or connectors before seeking professional help.