AutoCodesMercury – P2247 Mercury

P2247 Mercury Code - O2 Sensor Reference Voltage Circuit Open Bank 2 Sensor 1

Quick Answer

The Front Oxygen Sensor (O2 Sensor 1) is placed into the exhaust manifold. Common causes include Faulty Front Oxygen Sensor Bank 2, Front Oxygen Sensor Bank 2 harness is open or shorted, Front Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P2247 Mercury indicates O2 Sensor Reference Voltage Circuit Open Bank 2 Sensor 1.
Common causes
Common causes include Faulty Front Oxygen Sensor Bank 2, Front Oxygen Sensor Bank 2 harness is open or shorted, Front Oxygen Sensor Bank 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,446
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2247 Mercury Description

The Front Oxygen Sensor (O2 Sensor 1) is placed into the exhaust manifold. It detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The heated oxygen sensor 1 signal is sent to the Engine Control Module (ECM). The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.
OBDII Code P2247 Mercury - O2 Sensor Reference Voltage Circuit Open Bank 2 Sensor 1 - AutoCodes.com
P2247 Mercury Code - O2 Sensor Reference Voltage Circuit Open Bank 2 Sensor 1

What are the Possible Causes of the DTC P2247 Mercury?

  • Faulty Front Oxygen Sensor Bank 2
  • Front Oxygen Sensor Bank 2 harness is open or shorted
  • Front Oxygen Sensor Bank 2 circuit poor electrical connection

How to Fix the DTC P2247 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2247 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2247 Mercury code?

Need more information on how to fix the P2247 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2247 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2247 Mercury Code

What does the OBDII code P2247 mean for a Mercury vehicle?

1. P2247 indicates an issue with the O2 Sensor Reference Voltage Circuit Open for Bank 2 Sensor 1, meaning the sensor is not receiving the proper voltage signal from the ECU. 2.

What are the symptoms of code P2247 in a Mercury vehicle?

Common symptoms include poor fuel economy, rough idling, engine misfires, reduced performance, and the check engine light illuminating. 3.

What causes the P2247 code to appear in Mercury vehicles?

Possible causes include a damaged oxygen sensor, broken or corroded wiring, a faulty ECU, or a poor electrical connection in the O2 sensor circuit. 4.

Which oxygen sensor is affected by P2247 in a Mercury?

P2247 refers to the upstream oxygen sensor (Sensor 1) on Bank 2, which is the side of the engine opposite Bank 1. 5.

Can I drive my Mercury with a P2247 code?

Driving with a P2247 code is not recommended, as it can lead to poor engine performance, increased emissions, and potential damage to other components over time. 6.

How do I diagnose the P2247 code in a Mercury?

Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the sensor and wiring for damage, and testing the reference voltage with a multimeter. 7.

How do I fix the P2247 code on a Mercury vehicle?

Repairs may involve replacing the faulty oxygen sensor, repairing or replacing damaged wiring, cleaning corroded connections, or reprogramming or replacing the ECU. 8.

How much does it cost to fix the P2247 code in a Mercury?

Costs vary depending on the issue, but replacing an O2 sensor typically costs $150–$400, while wiring repairs or ECU replacement could be more expensive. 9.

Can I clear the P2247 code without fixing the problem?

Clearing the code without fixing the underlying issue is not recommended, as the code will likely return and the vehicle's performance will not improve. 10.

What tools do I need to troubleshoot the P2247 code in a Mercury?

You’ll need an OBDII scanner, a multimeter for voltage testing, and possibly a wiring diagram for the specific vehicle model.

Discuss the causes and fixes for P2247 Mercury OBDII Code

Code P2247 Mercury comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play