AutoCodesKIA – P2247 KIA

P2247 KIA Code - O2 Sensor Reference Voltage Circuit Open Bank 2 Sensor 1

Quick Answer

The Front Oxygen Sensor (O2 Sensor 1) is placed into the exhaust manifold. Common causes include Faulty Front Oxygen Sensor Bank 2, Front Oxygen Sensor Bank 2 harness is open or shorted, Front Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P2247 KIA indicates O2 Sensor Reference Voltage Circuit Open Bank 2 Sensor 1.
Common causes
Common causes include Faulty Front Oxygen Sensor Bank 2, Front Oxygen Sensor Bank 2 harness is open or shorted, Front Oxygen Sensor Bank 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,350
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2247 KIA Description

The Front Oxygen Sensor (O2 Sensor 1) is placed into the exhaust manifold. It detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The heated oxygen sensor 1 signal is sent to the Engine Control Module (ECM). The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.
OBDII Code P2247 KIA - O2 Sensor Reference Voltage Circuit Open Bank 2 Sensor 1 - AutoCodes.com
P2247 KIA Code - O2 Sensor Reference Voltage Circuit Open Bank 2 Sensor 1

What are the Possible Causes of the DTC P2247 KIA?

  • Faulty Front Oxygen Sensor Bank 2
  • Front Oxygen Sensor Bank 2 harness is open or shorted
  • Front Oxygen Sensor Bank 2 circuit poor electrical connection

How to Fix the DTC P2247 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2247 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2247 KIA code?

Need more information on how to fix the P2247 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2247 KIA code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2247 KIA Code

What does the OBDII code P2247 mean for a Kia?

The P2247 code indicates an issue with the oxygen (O2) sensor reference voltage circuit being open for Bank 2, Sensor 1.

What are the common symptoms of the P2247 code in a Kia?

Symptoms may include an illuminated check engine light, decreased fuel efficiency, rough idling, and poor engine performance.

What causes the P2247 code to appear in a Kia?

Common causes include a damaged or disconnected O2 sensor wiring, a faulty O2 sensor, a blown fuse, or issues with the engine control module (ECM).

Which sensor is affected by the P2247 code?

The code affects the upstream O2 sensor (Sensor 1) on Bank 2, which monitors the air-fuel ratio before the catalytic converter.

Can I drive my Kia with the P2247 code?

Driving with this code is not recommended as it can lead to poor engine performance and potential damage to the catalytic converter.

How do I diagnose the P2247 code in a Kia?

Diagnosis involves inspecting the O2 sensor wiring and connector for damage, checking for an open circuit, testing the sensor, and verifying the ECM's performance.

How can I fix the P2247 code on my Kia?

Repairs may include replacing the faulty O2 sensor, repairing damaged wiring or connectors, replacing a blown fuse, or reprogramming the ECM if necessary.

How much does it cost to fix the P2247 code in a Kia?

Repair costs vary; replacing an O2 sensor typically ranges from $150 to $400, while wiring repairs or ECM reprogramming can cost more.

What tools are needed to diagnose and fix the P2247 code?

You’ll need an OBDII scanner, a multimeter for testing circuits, and possibly basic hand tools for removing and replacing the O2 sensor.

Can the P2247 code cause long-term damage if not resolved?

Yes, ignoring this code can lead to engine performance issues, increased emissions, and potential damage to the catalytic converter over time.

Discuss the causes and fixes for P2247 KIA OBDII Code

Code P2247 KIA comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play