AutoCodes – Honda – P2228 2009 Honda Accord

P2228 2009 Honda Accord Code - Barometric Pressure Sensor Circuit Low Voltage

Quick Answer

The Barometric pressure (BARO) sensor is built into the Powertrain Control Module (PCM) and monitors atmospheric pressure. Common causes include Powertrain Control Module (PCM) outdated or incorrect software, Faulty Powertrain Control Module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2228 2009 Honda Accord indicates Barometric Pressure Sensor Circuit Low Voltage.
Common causes: Common causes include Powertrain Control Module (PCM) outdated or incorrect software, Faulty Powertrain Control Module (PCM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,349

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 23, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2228 2009 Honda Accord Description

The Barometric pressure (BARO) sensor is built into the Powertrain Control Module (PCM) and monitors atmospheric pressure. When the throttle valve is wide open, the Manifold Absolute Pressure (MAP) sensor output is nearly equal to the BARO sensor output. If the throttle position is beyond a value stored in the PCM that is used to detect wide-open throttle, and if the difference between the MAP sensor output and the BARO sensor output is equal to or greater than a set value, a malfunction in the BARO sensor output is detected and a Diagnostic Trouble Code (DTC) is stored.

OBDII Code P2228 2009 Honda Accord - Barometric Pressure Sensor Circuit Low Voltage - AutoCodes.com — P2228 2009 Honda Accord Code - Barometric Pressure Sensor Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P2228 2009 Honda Accord?

Powertrain Control Module (PCM) outdated or incorrect software
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2228 2009 Honda Accord?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2228 2009 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2228 2009 Honda Accord code?

Need more information on how to fix the P2228 2009 Honda Accord code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2228 2009 Honda Accord code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2228 2009 Honda Accord Code

1. What are the common symptoms of OBDII code P2228 on a 2009 Honda Accord?

- The common symptoms include poor engine performance, decreased fuel efficiency, and the illumination of the Check Engine light.

2. What does OBDII code P2228 on a 2009 Honda Accord indicate?

- The code P2228 indicates a low voltage condition in the barometric pressure sensor circuit of the vehicle.

3. What are the possible causes of OBDII code P2228 on a 2009 Honda Accord?

- Possible causes include a faulty barometric pressure sensor, damaged wiring or connectors in the sensor circuit, or an issue with the engine control module (ECM).

4. How can I diagnose the cause of OBDII code P2228 on my 2009 Honda Accord?

- Proper diagnosis involves inspecting the barometric pressure sensor, checking for damaged wiring or connectors, and testing the ECM for any faults using a diagnostic scanner.

5. Can I continue driving my 2009 Honda Accord with OBDII code P2228?

- It is not recommended to continue driving the vehicle with this code as it can lead to further damage and decreased performance.

6. How can I repair OBDII code P2228 on my 2009 Honda Accord?

- Repairing the issue involves replacing the faulty barometric pressure sensor, repairing any damaged wiring or connectors, and clearing the code with a diagnostic scanner.

7. Will resetting the Check Engine light fix OBDII code P2228 on my 2009 Honda Accord?

- Resetting the light may temporarily turn it off, but the underlying issue causing the code will still need to be diagnosed and repaired to prevent future occurrences.

8. Can a DIY enthusiast fix OBDII code P2228 on a 2009 Honda Accord?

- Depending on the level of expertise, a DIY enthusiast may be able to diagnose and repair this code by following proper diagnostic procedures and using the necessary tools.

9. How much does it cost to fix OBDII code P2228 on a 2009 Honda Accord at a mechanic?

- The cost of fixing this code at a mechanic can vary depending on the exact cause, but it typically ranges from $150 to $300 for parts and labor.

10. Are there any recalls or technical service bulletins related to OBDII code P2228 on a 2009 Honda Accord?

- It's recommended to check with a Honda dealership or visit the National Highway Traffic Safety Administration (NHTSA) website for any relevant recalls or technical service bulletins related to this code.