AutoCodes – Dodge – P2213 Dodge

P2213 Dodge Code - NOx Sensor Circuit Bank 2

Quick Answer

The Nitrogen Oxide (NOx) sensor measures the amount of nitric oxide and nitrogen oxide in the exhaust system. Common causes include Faulty Nitrogen Oxide (NOx) Sensor, Nitrogen Oxide (NOx) Sensor harness is open or shorted, Nitrogen Oxide (NOx) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2213 Dodge indicates NOx Sensor Circuit Bank 2.
Common causes: Common causes include Faulty Nitrogen Oxide (NOx) Sensor, Nitrogen Oxide (NOx) Sensor harness is open or shorted, Nitrogen Oxide (NOx) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,306

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2213 Dodge Description

The Nitrogen Oxide (NOx) sensor measures the amount of nitric oxide and nitrogen oxide in the exhaust system. When the NOx sensor indicates that the storage capacity has been reached, the regeneration phase is initiated by the fueling management system. The Powertrain Control Module (PCM) monitors the NOx sensor and sets the code when the NOx sensor circuit voltage reading is not within the normal operating threshold for a specific engine bank.

OBDII Code P2213 Dodge - NOx Sensor Circuit Bank 2 - AutoCodes.com — P2213 Dodge Code - NOx Sensor Circuit Bank 2

What does this mean?

What are the Possible Causes of the DTC P2213 Dodge?

Faulty Nitrogen Oxide (NOx) Sensor
Nitrogen Oxide (NOx) Sensor harness is open or shorted
Nitrogen Oxide (NOx) Sensor circuit poor electrical connection

How to Fix the DTC P2213 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2213 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2213 Dodge code?

Need more information on how to fix the P2213 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2213 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2213 Dodge Code

1. What does the OBDII code P2213 mean on a Dodge vehicle?

P2213 indicates an issue with the NOx (Nitrogen Oxide) sensor circuit on Bank 2, which monitors and controls emissions to meet environmental standards.

2. What are common symptoms of a P2213 code on a Dodge?

Symptoms may include an illuminated check engine light, reduced fuel efficiency, poor engine performance, or the vehicle entering limp mode.

3. What causes a P2213 code on a Dodge?

Common causes include a faulty NOx sensor, damaged wiring or connectors, exhaust leaks near the sensor, or a malfunctioning powertrain control module (PCM).

4. How do I diagnose a P2213 code on my Dodge?

Diagnose the code by inspecting the NOx sensor and its wiring for damage, checking for exhaust leaks, and using a scan tool to monitor sensor data and confirm functionality.

5. Can I drive my Dodge with a P2213 code?

While the vehicle may still be drivable, it could experience reduced performance and higher emissions. Prolonged driving without repair may damage other components.

6. How do I fix a P2213 code on a Dodge?

Repairs may involve replacing the faulty NOx sensor, repairing damaged wiring or connectors, or addressing any exhaust leaks near the sensor.

7. Where is Bank 2 on a Dodge vehicle?

Bank 2 refers to the side of the engine opposite Bank 1, which typically contains the second set of cylinders in a V6 or V8 engine.

8. How much does it cost to repair a P2213 code on a Dodge?

The repair cost can range from $200 to $600 or more, depending on whether the NOx sensor, wiring, or another component needs replacement.

9. Can a bad NOx sensor damage my Dodge’s engine?

While a faulty NOx sensor won’t directly damage the engine, it can cause poor performance, increased emissions, and potential damage to the catalytic converter if left unaddressed.

10. How can I prevent a P2213 code from occurring?

Regular maintenance, including inspecting exhaust components, ensuring proper fuel quality, and addressing any warning signs early, can help prevent this code.