AutoCodes – Chevrolet – P2211 2014 Chevrolet Silverado

P2211 2014 Chevrolet Silverado Code - NOx Sensor 1 Heater Feedback Circuit Low Voltage

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2211 2014 Chevrolet Silverado indicates NOx Sensor 1 Heater Feedback Circuit Low Voltage.
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 240

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2211 2014 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P2211 2014 Chevrolet Silverado - NOx Sensor 1 Heater Feedback Circuit Low Voltage - AutoCodes.com — P2211 2014 Chevrolet Silverado Code - NOx Sensor 1 Heater Feedback Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P2211 2014 Chevrolet Silverado?

Faulty Nitrogen Oxides (NOx) Sensor
Nitrogen Oxides Sensor harness is open or shorted
Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P2211 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2211 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2211 2014 Chevrolet Silverado code?

Need more information on how to fix the P2211 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2211 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2211 2014 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P2211 in a 2014 Chevrolet Silverado?

- Common symptoms include check engine light illumination, decreased fuel efficiency, and potential issues with the vehicle's emissions system.

2. What does the NOx Sensor 1 Heater Feedback Circuit Low Voltage code mean in a 2014 Chevrolet Silverado?

- This code indicates that there is a low voltage condition detected in the heater feedback circuit of the NOx sensor 1 in the emissions system.

3. What are the possible causes of OBDII code P2211 in a 2014 Chevrolet Silverado?

- Possible causes include a faulty NOx sensor, damaged wiring or connectors in the heater circuit, a blown fuse, or issues with the vehicle's ECM.

4. How can I diagnose the NOx Sensor 1 Heater Feedback Circuit Low Voltage issue in my 2014 Silverado?

- Diagnosis involves checking the wiring and connectors for damage, testing the NOx sensor's resistance, inspecting the fuse, and using a scan tool to monitor sensor readings.

5. Can I continue driving my 2014 Chevrolet Silverado with the P2211 code present?

- It is generally not recommended to drive the vehicle with this code as it can lead to increased emissions and potential damage to the catalytic converter.

6. How can I repair the NOx Sensor 1 Heater Feedback Circuit Low Voltage issue in my 2014 Silverado?

- Repair may involve replacing the NOx sensor, repairing damaged wiring or connectors, replacing a blown fuse, or resetting the ECM after addressing the underlying cause.

7. Will resetting the check engine light resolve the P2211 code issue in my 2014 Chevrolet Silverado?

- Resetting the check engine light may temporarily turn off the warning, but it will not fix the underlying problem causing the P2211 code.

8. Is it possible to drive my 2014 Silverado without the NOx sensor working properly?

- It is not recommended to drive the vehicle without the NOx sensor functioning correctly, as it plays a crucial role in monitoring and reducing harmful emissions.

9. How much does it typically cost to repair the NOx Sensor 1 Heater Feedback Circuit Low Voltage issue in a 2014 Chevrolet Silverado?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. Can a DIY enthusiast replace the NOx sensor in a 2014 Silverado to address the P2211 code?

- While it is possible for experienced DIY enthusiasts to replace the NOx sensor, it is generally recommended to have a professional mechanic perform the repair to ensure proper installation and function.