P2206 2017 GMC Sierra Code - NOx Sensor 1 Heater Control Circuit Low Voltage
Quick Answer
The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2206 2017 GMC Sierra indicates NOx Sensor 1 Heater Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2206 2017 GMC Sierra Description
What are the Possible Causes of the DTC P2206 2017 GMC Sierra?
- Faulty Nitrogen Oxides (NOx) Sensor
- Nitrogen Oxides Sensor harness is open or shorted
- Nitrogen Oxides Sensor circuit poor electrical connection
How to Fix the DTC P2206 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2206 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2206 2017 GMC Sierra code?
Need more information on how to fix the P2206 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2206 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2206 2017 GMC Sierra Code
1. What does the P2206 code mean on a 2017 GMC Sierra?
The P2206 code indicates a problem with the NOx sensor 1 heater control circuit, specifically low voltage detected.
2. What are the common symptoms of code P2206 in a GMC Sierra?
Symptoms may include the check engine light turning on, reduced engine performance, poor fuel efficiency, and possible difficulty meeting emission standards.
3. What causes the P2206 code to appear?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the heater control circuit, or a malfunctioning ECM.
4. Can I drive with the P2206 code on my 2017 GMC Sierra?
While the truck may still be drivable, prolonged driving could lead to increased emissions, reduced fuel efficiency, and potential damage to the exhaust system.
5. How do I diagnose the P2206 code on my GMC Sierra?
Start by inspecting the wiring and connectors for damage. Use a multimeter to check for proper voltage at the NOx sensor heater circuit, and test the sensor itself for functionality.
6. How do I fix the P2206 code on a 2017 GMC Sierra?
Repairs may involve replacing the NOx sensor, repairing damaged wiring or connectors, or updating/reprogramming the ECM if necessary.
7. How much does it cost to fix the P2206 code on a GMC Sierra?
Repair costs can vary widely, but replacing a NOx sensor typically ranges from $300 to $600, including parts and labor.
8. Can a bad NOx sensor cause the P2206 code?
Yes, a malfunctioning NOx sensor is a common cause of this code, particularly if the heater element inside the sensor fails.
9. Do I need special tools to fix the P2206 code?
You may need an OBDII scanner to clear the code and verify repairs, as well as a multimeter to check voltage and continuity in the circuit.
10. Will clearing the P2206 code resolve the issue?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be fixed to prevent the code from returning.
Discuss the causes and fixes for P2206 2017 GMC Sierra OBDII Code
Code P2206 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.