AutoCodesGMC – P2206 2015 GMC Sierra

P2206 2015 GMC Sierra Code - NOx Sensor 1 Heater Control Circuit Low Voltage

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2206 2015 GMC Sierra indicates NOx Sensor 1 Heater Control Circuit Low Voltage.
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 184
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 24, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2206 2015 GMC Sierra Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P2206 2015 GMC Sierra - NOx Sensor 1 Heater Control Circuit Low Voltage - AutoCodes.com
P2206 2015 GMC Sierra Code - NOx Sensor 1 Heater Control Circuit Low Voltage

What are the Possible Causes of the DTC P2206 2015 GMC Sierra?

  • Faulty Nitrogen Oxides (NOx) Sensor
  • Nitrogen Oxides Sensor harness is open or shorted
  • Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P2206 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2206 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2206 2015 GMC Sierra code?

Need more information on how to fix the P2206 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2206 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2206 2015 GMC Sierra Code

1. What does the OBDII code P2206 mean on a 2015 GMC Sierra?

P2206 indicates a problem with the NOx Sensor 1 Heater Control Circuit, specifically low voltage detected in the circuit.

2. What are the symptoms of code P2206 in a 2015 GMC Sierra?

Common symptoms include a check engine light, reduced fuel efficiency, poor engine performance, and possible limp mode activation.

3. What causes code P2206 in a 2015 GMC Sierra?

The code is typically caused by a faulty NOx sensor, damaged wiring or connectors, a failed sensor heater, or issues with the engine control module (ECM).

4. Can I drive my 2015 GMC Sierra with a P2206 code?

While the truck may still be drivable, prolonged use could result in increased emissions, reduced performance, and potential damage to the emissions system.

5. How do I diagnose the cause of a P2206 code?

Start by inspecting the NOx sensor wiring and connectors for damage or corrosion, then test the sensor heater circuit with a multimeter to check for proper voltage and resistance.

6. How do I fix code P2206 on a 2015 GMC Sierra?

Repairs may include replacing the NOx sensor, repairing damaged wiring or connectors, or reprogramming/updating the ECM if necessary.

7. How much does it cost to repair a P2206 code on a 2015 GMC Sierra?

The cost can vary, but replacing a NOx sensor typically ranges from $300 to $700, depending on parts and labor costs.

8. Can a bad NOx sensor cause other problems in my GMC Sierra?

Yes, a faulty NOx sensor can lead to increased emissions, reduced fuel efficiency, and potential damage to other components in the emissions system.

9. How do I prevent a P2206 code from recurring?

Regular maintenance, inspecting wiring for damage, using quality fuel, and addressing check engine lights promptly can help prevent this issue.

10. Will clearing the code fix the P2206 issue?

Clearing the code will turn off the check engine light temporarily, but it won’t resolve the underlying issue causing the code to appear.

Discuss the causes and fixes for P2206 2015 GMC Sierra OBDII Code

Code P2206 2015 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play