AutoCodes – MINI – P2201 MINI

P2201 MINI Code - NOx Sensor Circuit Range/Performance Bank 1 Sensor 1

Quick Answer

This fault code is stored when a malfunction is detected with the NOx sensor circuit. Common causes include Faulty NOx Sensor, NOx Sensor harness is open or shorted, NOx Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2201 MINI indicates NOx Sensor Circuit Range/Performance Bank 1 Sensor 1.
Common causes: Common causes include Faulty NOx Sensor, NOx Sensor harness is open or shorted, NOx Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 541

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 23, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2201 MINI Description

This fault code is stored when a malfunction is detected with the NOx sensor circuit. Some lean burn and direct injection vehicles will use a selective catalytic reduction system (SCR), which uses a NOx accumulator to store oxides of Nitrogen and allows them to be reduced at a suitable time. A NOx sensor is used to detect when regeneration is required and when the regeneration is complete. The NOx sensor will have a module located close to the sensor which communicates with the engine control module. A heater circuit is required to get the NOx sensor up to operating temperature quickly to allow for reliable performance in a timely manner.

OBDII Code P2201 MINI - NOx Sensor Circuit Range/Performance Bank 1 Sensor 1 - AutoCodes.com — P2201 MINI Code - NOx Sensor Circuit Range/Performance Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P2201 MINI?

Faulty NOx Sensor
NOx Sensor harness is open or shorted
NOx Sensor circuit poor electrical connection

How to Fix the DTC P2201 MINI?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2201 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2201 MINI code?

Need more information on how to fix the P2201 MINI code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2201 MINI code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2201 MINI Code

1. What are the common symptoms of OBDII code P2201 in a MINI vehicle?

- Common symptoms include reduced engine performance, decreased fuel efficiency, and the illumination of the check engine light.

2. What causes the OBDII code P2201 in a MINI related to the NOx sensor circuit?

- The P2201 code is typically triggered by issues with the NOx sensor itself, wiring problems, or issues with the engine control module (ECM).

3. How can I diagnose the NOx sensor circuit issue causing code P2201 in my MINI?

- Diagnosis involves inspecting the NOx sensor and its wiring for damage, testing the sensor's functionality, and checking for any corrosion or loose connections.

4. Can a faulty oxygen sensor cause code P2201 in a MINI?

- While possible, a faulty oxygen sensor is less likely to directly cause the P2201 code, as it is specifically related to the NOx sensor circuit.

5. What are some repair tips for addressing OBDII code P2201 in a MINI?

- Repair tips include replacing the NOx sensor if faulty, repairing any damaged wiring, and resetting the fault codes after the repair work is completed.

6. Is it safe to continue driving my MINI with the P2201 code present?

- It is not recommended to drive the vehicle with the P2201 code active, as it can lead to further damage and may result in reduced performance and fuel efficiency.

7. How much does it typically cost to repair the NOx sensor circuit issue causing code P2201 in a MINI?

- The cost of repairs for the P2201 code can vary depending on the extent of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

8. Can I reset the P2201 code in my MINI using an OBDII scanner?

- Yes, you can reset the P2201 code using an OBDII scanner, but it is important to address the underlying issue causing the code before resetting it to prevent it from reoccurring.

9. Are there any recalls or service bulletins related to OBDII code P2201 in MINI vehicles?

- MINI has not issued any recalls specifically for the P2201 code, but it is always a good idea to check with your local dealership or MINI service center for any related service bulletins.

10. How often should the NOx sensor be replaced in a MINI to prevent code P2201 from recurring?

- The NOx sensor does not have a specific replacement interval, but it is recommended to follow the manufacturer's maintenance schedule and replace the sensor if it fails or shows signs of malfunction to prevent the P2201 code from reoccurring.