AutoCodes – Honda – P2195 2008 Honda Accord

P2195 2008 Honda Accord Code - Rear A/F Sensor Sensor 1 Bank 1 Signal Stuck Lean

Quick Answer

Air-Fuel Ratio (A/F) sensor need to reach a minimum operating temperature of 1200 degrees F to produce an accurate voltage signal. Common causes include Rear A/F Sensor Sensor 1 Bank 1 harness is open or shorted, Rear A/F Sensor Sensor 1 Bank 1 electrical circuit poor connection, Faulty Rear A/F Sensor Sensor 1 Bank 1. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P2195 2008 Honda Accord indicates Rear A/F Sensor Sensor 1 Bank 1 Signal Stuck Lean.
Common causes
Common causes include Rear A/F Sensor Sensor 1 Bank 1 harness is open or shorted, Rear A/F Sensor Sensor 1 Bank 1 electrical circuit poor connection, Faulty Rear A/F Sensor Sensor 1 Bank 1.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 5,275
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2195 2008 Honda Accord Description

Air-Fuel Ratio (A/F) sensor need to reach a minimum operating temperature of 1200 degrees F to produce an accurate voltage signal. The faster the air-fuel ratio sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM).
In order to achieve the require temperature, a heater element is included inside the air-fuel ratio sensor. The ECM controls the air-fuel ratio sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
OBDII Code P2195 2008 Honda Accord - Rear A/F Sensor Sensor 1 Bank 1 Signal Stuck Lean - AutoCodes.com
P2195 2008 Honda Accord Code - Rear A/F Sensor Sensor 1 Bank 1 Signal Stuck Lean

What are the Possible Causes of the DTC P2195 2008 Honda Accord?

  • Rear A/F Sensor Sensor 1 Bank 1 harness is open or shorted
  • Rear A/F Sensor Sensor 1 Bank 1 electrical circuit poor connection
  • Faulty Rear A/F Sensor Sensor 1 Bank 1
  • Vacuum leak
  • Low fuel pressure

How to Fix the DTC P2195 2008 Honda Accord?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2195 2008 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2195 2008 Honda Accord code?

Need more information on how to fix the P2195 2008 Honda Accord code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2195 2008 Honda Accord code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2195 2008 Honda Accord Code

1. What does OBDII code P2195 mean on a 2008 Honda Accord?

The code P2195 indicates that the Rear Air/Fuel (A/F) Sensor 1 Bank 1 signal is stuck lean, meaning the sensor is detecting a consistently lean air/fuel mixture.

2. What are the common symptoms of OBDII code P2195 on a 2008 Honda Accord?

Common symptoms of code P2195 may include poor fuel economy, rough idling, engine misfires, hesitation or lack of power during acceleration, and the illumination of the Check Engine Light.

3. What are the possible causes of OBDII code P2195 on a 2008 Honda Accord?

The most common causes of code P2195 include a faulty rear A/F sensor, a vacuum leak in the intake system, a clogged fuel filter, a malfunctioning fuel pressure regulator, or issues with the engine's air intake system.

4. How can I diagnose OBDII code P2195 on a 2008 Honda Accord?

Diagnosing code P2195 typically involves using an OBDII scanner to retrieve the code, inspecting the rear A/F sensor for any damage or contamination, checking for vacuum leaks, testing fuel pressure, and ensuring proper air intake.

5. Can I continue driving my 2008 Honda Accord with OBDII code P2195?

It is not recommended to drive your vehicle with an unresolved P2195 code, as it can lead to poor engine performance and potentially cause damage to other components over time. It is best to address the issue promptly.

6. How can I repair OBDII code P2195 on my 2008 Honda Accord?

Repairing code P2195 may involve replacing the rear A/F sensor, fixing any vacuum leaks, replacing the fuel filter, addressing fuel pressure issues, or repairing any damaged components in the air intake system.

7. Is it possible to reset OBDII code P2195 on a 2008 Honda Accord without fixing the underlying issue?

While you can reset the Check Engine Light and temporarily clear the code, the underlying issue causing code P2195 will persist and may trigger the light to come back on. It is crucial to address the root cause of the problem.

8. How much does it cost to fix OBDII code P2195 on a 2008 Honda Accord?

The cost of fixing code P2195 can vary depending on the specific cause of the issue. Replacing the rear A/F sensor can cost between $150 to $300, while addressing other potential causes like vacuum leaks or fuel system repairs may incur additional costs.

9. Can a DIY enthusiast repair OBDII code P2195 on a 2008 Honda Accord?

While some aspects of addressing code P2195 can be tackled by DIY enthusiasts, diagnosing and repairing the issue may require specialized tools and knowledge. It is recommended to consult a professional mechanic for a comprehensive fix.

10. How often does OBDII code P2195 occur in 2008 Honda Accords?

Code P2195 can occur sporadically in 2008 Honda Accords due to various factors like sensor wear, environmental conditions, and maintenance practices. Regular vehicle inspections and prompt attention to any warning lights can help prevent this code from occurring frequently.

Discuss the causes and fixes for P2195 2008 Honda Accord OBDII Code

Code P2195 2008 Honda Accord comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play