AutoCodes – Acura – P2187 Acura

P2187 Acura Code - Fuel System Too Lean at Idle

Quick Answer

The Powertrain Control Module (PCM) detects the oxygen content in the exhaust gas from the air/fuel ratio (A/F) sensor (sensor 1) signal voltage, and it uses fuel feedback control to maintain the optimal air/fuel ratio. Common causes include Faulty fuel pump, Faulty fuel injector, Faulty fuel pressure regulator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2187 Acura indicates Fuel System Too Lean at Idle.
Common causes
Common causes include Faulty fuel pump, Faulty fuel injector, Faulty fuel pressure regulator.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 633
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 18, 2021
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2187 Acura Description

The Powertrain Control Module (PCM) detects the oxygen content in the exhaust gas from the air/fuel ratio (A/F) sensor (sensor 1) signal voltage, and it uses fuel feedback control to maintain the optimal air/fuel ratio. The air/fuel ratio coefficient for correcting the amount of injected fuel is the short-term fuel trim. The PCM varies short-term fuel trim continuously to keep the air/fuel ratio close to the stoichiometric ratio for all driving conditions. In case the breather pipe is disconnected, the air amount at the mass airflow (MAF) sensor decreases, and the basic fuel amount decrease; as a result, the fuel injection quantity correction coefficient becomes larger to compensate for the gap. This condition could be seen prominently at low load which the intake air amount is small. The detection of breather pipe disconnection is done by monitoring the gap which is determined by fuel injection quantity correction coefficient average during idle and continuously updating fuel injection quantity correction coefficient. If the fuel injection quantity correction coefficient exceeds a threshold value, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC). The purge is stopped by the fuel injection quantity correction coefficient to exclude the influence of purging during the detection.
OBDII Code P2187 Acura - Fuel System Too Lean at Idle - AutoCodes.com
P2187 Acura Code - Fuel System Too Lean at Idle

What are the Possible Causes of the DTC P2187 Acura?

  • Faulty fuel pump
  • Faulty fuel injector
  • Faulty fuel pressure regulator
  • Faulty fuel line
  • Faulty fuel supply system
  • MAF sensor range/performance problem
  • Manifold absolute pressure (MAP) sensor range/performance problem
  • Faulty A/F Sensor (Sensor 1)
  • Faulty Secondary HO2S (Sensor 2)

How to Fix the DTC P2187 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2187 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2187 Acura code?

Need more information on how to fix the P2187 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2187 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2187 Acura Code

1. What are the common symptoms of OBDII code P2187 in an Acura related to a fuel system too lean at idle?

- Common symptoms include rough idle, hesitation or stalling at idle, reduced fuel efficiency, and potential engine misfires.

2. What are some possible causes of the OBDII code P2187 in an Acura indicating a lean fuel system at idle?

- Possible causes include a vacuum leak, faulty oxygen sensor, dirty or clogged fuel injectors, a weak fuel pump, or a malfunctioning mass airflow sensor.

3. How serious is the OBDII code P2187 in an Acura indicating a lean fuel system at idle?

- Ignoring this code can potentially lead to engine damage over time due to poor fuel mixture and combustion issues. It is recommended to address the issue promptly.

4. Can a dirty air filter trigger the OBDII code P2187 in an Acura related to a lean fuel system at idle?

- Yes, a dirty air filter can disrupt the air-fuel mixture balance, potentially causing a lean condition at idle and triggering the P2187 code.

5. How can I diagnose and repair the OBDII code P2187 in my Acura indicating a lean fuel system at idle?

- Diagnosis involves checking for vacuum leaks, testing oxygen sensors, inspecting fuel injectors, and ensuring proper fuel pressure. Repair may involve fixing leaks, replacing sensors, cleaning injectors, or addressing air intake issues.

6. Will driving with the OBDII code P2187 in an Acura indicating a lean fuel system at idle damage the engine?

- Continued driving with this code may lead to poor engine performance, reduced fuel efficiency, and potential long-term engine damage. It is advisable to address the underlying issue promptly.

7. Can a faulty fuel pressure regulator cause the OBDII code P2187 in an Acura related to a lean fuel system at idle?

- Yes, a malfunctioning fuel pressure regulator can disrupt the proper fuel supply to the engine, leading to a lean condition at idle and triggering the P2187 code.

8. Is it safe to continue driving my Acura with the OBDII code P2187 indicating a lean fuel system at idle?

- While the vehicle may still be operable, driving with this issue can result in poor engine performance and potential damage over time. It is recommended to address the problem as soon as possible.

9. How can I prevent the recurrence of the OBDII code P2187 in my Acura after repairing a lean fuel system at idle?

- Regular maintenance, including air filter replacement, fuel system cleaning, and sensor checks, can help prevent the recurrence of the P2187 code related to a lean fuel system at idle.

10. Will resetting the OBDII code P2187 in my Acura make the issue go away permanently?

- Simply resetting the code without addressing the underlying problem will not resolve the issue permanently. It is crucial to diagnose and repair the root cause to prevent the code from reappearing.

Discuss the causes and fixes for P2187 Acura OBDII Code

Code P2187 Acura comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play