AutoCodesDodge – P2184 Dodge

P2184 Dodge Code - Engine Coolant Temperature Sensor 2 Circuit Low

Quick Answer

Engine Coolant Temperature (ECT) sensor 2 is a thermistor attached to the radiator. Common causes include Low coolant level, Faulty Engine Coolant Temperature Sensor, Stuck or leaking thermostat. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2184 Dodge indicates Engine Coolant Temperature Sensor 2 Circuit Low.
Common causes
Common causes include Low coolant level, Faulty Engine Coolant Temperature Sensor, Stuck or leaking thermostat.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,780
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2184 Dodge Description

Engine Coolant Temperature (ECT) sensor 2 is a thermistor attached to the radiator. The Powertrain Control Module (PCM) applies voltage (about 5 V) to the ECT2 signal circuit through a pull up resistor. As the engine coolant temperature cools, ECT sensor 2 resistance increases, and the PCM detects a high signal voltage. As the engine coolant warms, the sensor resistance decreases, and the PCM detects a low ECT2 signal voltage. If the ECT sensor 2 output voltage is less than a set value when the engine coolant temperature is high, the PCM detects a malfunction and a DTC is stored.
OBDII Code P2184 Dodge - Engine Coolant Temperature Sensor 2 Circuit Low - AutoCodes.com
P2184 Dodge Code - Engine Coolant Temperature Sensor 2 Circuit Low

What are the Possible Causes of the DTC P2184 Dodge?

  • Low coolant level
  • Faulty Engine Coolant Temperature Sensor
  • Stuck or leaking thermostat
  • Engine Coolant Temperature Sensor harness is open or shorted
  • Engine Coolant Temperature Sensor circuit poor electrical connection

How to Fix the DTC P2184 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2184 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2184 Dodge code?

Need more information on how to fix the P2184 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2184 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2184 Dodge Code

1. What does the OBDII code P2184 mean on a Dodge vehicle?

P2184 indicates that the Engine Control Module (ECM) has detected a low voltage signal from the Engine Coolant Temperature (ECT) Sensor 2, suggesting a circuit issue.

2. What are the common symptoms of code P2184 in a Dodge?

Symptoms may include poor fuel efficiency, engine overheating, difficulty starting the engine, erratic temperature gauge readings, and the check engine light turning on.

3. What causes the P2184 code to appear?

Common causes include a faulty ECT sensor, damaged wiring or connectors in the ECT sensor circuit, low coolant levels, or a malfunctioning ECM.

4. Can I still drive my Dodge with the P2184 code active?

While the vehicle may still operate, driving with this code can risk engine overheating and potential damage. It’s best to address the issue promptly.

5. How do I diagnose the P2184 code on a Dodge?

Start by inspecting the ECT sensor and its wiring for damage or corrosion. Check for proper voltage and resistance readings using a multimeter. Verify coolant levels and ensure there are no leaks.

6. How do you fix code P2184 on a Dodge vehicle?

Repairs may include replacing the faulty ECT sensor, repairing or replacing damaged wiring/connectors, refilling coolant, or resetting the ECM after the issue is resolved.

7. Is it expensive to fix the P2184 code on a Dodge?

Repair costs depend on the root cause. Replacing the ECT sensor typically costs $50–$150, while fixing wiring or ECM issues can be more expensive.

8. Can low coolant levels trigger the P2184 code?

Yes, low coolant levels can cause inaccurate readings from the ECT sensor, leading to this code.

9. How do I prevent the P2184 code from recurring on my Dodge?

Regularly check coolant levels, inspect the cooling system for leaks, and maintain the ECT sensor and wiring to prevent future issues.

10. Will clearing the P2184 code solve the problem?

Clearing the code may temporarily turn off the check engine light, but the underlying issue must be fixed to prevent the code from returning.

Discuss the causes and fixes for P2184 Dodge OBDII Code

Code P2184 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play