P2166 Dodge Code - Throttle/Pedal Position Sensor 'D' Maximum Stop Performance
Quick Answer
The Powertrain Control Module (PCM) monitors the electronic throttle for the ability of the throttle plate to reach the upper mechanical stop position within a calibrated amount of time at ignition ON. Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2166 Dodge indicates Throttle/Pedal Position Sensor 'D' Maximum Stop Performance.
- Common causes
- Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2166 Dodge Description
What are the Possible Causes of the DTC P2166 Dodge?
- Faulty Electronic Throttle Control (ETC)
- Electronic Throttle Control (ETC) harness is open or shorted
- Electronic Throttle Control (ETC) Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2166 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2166 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2166 Dodge code?
Need more information on how to fix the P2166 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2166 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2166 Dodge Code
1. What are the common symptoms of OBDII code P2166 in a Dodge related to the Throttle/Pedal Position Sensor 'D' Maximum Stop Performance?
- Common symptoms include reduced engine power, hesitation or stalling when accelerating, and the vehicle going into limp mode.
2. What are the possible causes of OBDII code P2166 in a Dodge related to the Throttle/Pedal Position Sensor 'D' Maximum Stop Performance?
- Possible causes may include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, or issues with the throttle body itself.
3. How can I diagnose OBDII code P2166 in a Dodge related to the Throttle/Pedal Position Sensor 'D' Maximum Stop Performance?
- Diagnose the code by using a scan tool to check for the code, inspecting the throttle position sensor and its wiring for any visible damage, and testing the sensor's voltage and resistance.
4. What are some repair tips for fixing OBDII code P2166 in a Dodge related to the Throttle/Pedal Position Sensor 'D' Maximum Stop Performance?
- Repair tips may include replacing the throttle position sensor, repairing any damaged wiring or connectors, cleaning the throttle body, and performing a throttle body relearn procedure.
5. Can driving with OBDII code P2166 in a Dodge related to the Throttle/Pedal Position Sensor 'D' Maximum Stop Performance cause further damage?
- Continuing to drive with this code may lead to poor engine performance, reduced fuel efficiency, and potential damage to other engine components over time if not addressed promptly.
6. How long does it typically take to repair OBDII code P2166 in a Dodge related to the Throttle/Pedal Position Sensor 'D' Maximum Stop Performance?
- The repair time can vary depending on the exact cause of the issue, but it usually takes a few hours to diagnose and fix the problem.
7. Is it safe to drive my Dodge with OBDII code P2166 related to the Throttle/Pedal Position Sensor 'D' Maximum Stop Performance?
- It is not recommended to drive the vehicle with this code present, as it can lead to unsafe driving conditions and potential further damage to the engine if not addressed promptly.
8. Can I reset OBDII code P2166 in a Dodge related to the Throttle/Pedal Position Sensor 'D' Maximum Stop Performance myself?
- You can reset the code using a scan tool, but it is important to diagnose and fix the underlying issue causing the code to prevent it from reoccurring.
9. Will OBDII code P2166 in a Dodge related to the Throttle/Pedal Position Sensor 'D' Maximum Stop Performance cause the check engine light to illuminate?
- Yes, this code will trigger the check engine light to illuminate on the vehicle's dashboard to alert you to the issue.
10. Is OBDII code P2166 in a Dodge related to the Throttle/Pedal Position Sensor 'D' Maximum Stop Performance a common problem?
- While not as common as some other codes, issues with the throttle position sensor leading to this code can occur in Dodge vehicles and should be addressed promptly to prevent further complications.
Discuss the causes and fixes for P2166 Dodge OBDII Code
Code P2166 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
