AutoCodes – Dodge – P2156 Dodge

P2156 Dodge Code - Cylinder 4 Injector High Control Circuit Low Voltage

Quick Answer

The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits. Common causes include Faulty Fuel Injector 4, Fuel Injector 4 harness is open or shorted, Fuel Injector 4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2156 Dodge indicates Cylinder 4 Injector High Control Circuit Low Voltage.
Common causes
Common causes include Faulty Fuel Injector 4, Fuel Injector 4 harness is open or shorted, Fuel Injector 4 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,458
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 23, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2156 Dodge Description

The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits. The ECM energizes each fuel injector by grounding the low control circuit of the fuel injector. The ECM monitors the status of the fuel injector circuits. When a fuel injector circuit condition is detected by the ECM, the affected fuel injector(s) is disabled. The Diagnostic Trouble Code (DTC) will be set when the ECM detects the fuel injector high voltage supply circuit is shorted to ground for greater than 2 s.
OBDII Code P2156 Dodge - Cylinder 4 Injector High Control Circuit Low Voltage - AutoCodes.com
P2156 Dodge Code - Cylinder 4 Injector High Control Circuit Low Voltage

What are the Possible Causes of the DTC P2156 Dodge?

  • Faulty Fuel Injector 4
  • Fuel Injector 4 harness is open or shorted
  • Fuel Injector 4 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2156 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2156 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2156 Dodge code?

Need more information on how to fix the P2156 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2156 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2156 Dodge Code

What does the OBDII code P2156 on a Dodge vehicle mean?

The P2156 code indicates a problem with the Cylinder 4 Injector High Control Circuit, specifically a low voltage issue.

What are the common symptoms of the P2156 code?

Symptoms may include poor engine performance, misfires, rough idling, reduced fuel efficiency, and possibly an illuminated check engine light.

What causes the P2156 code on a Dodge?

Common causes include damaged or corroded wiring, a faulty fuel injector, a defective injector driver in the PCM, or poor electrical connections.

Can I drive my Dodge with the P2156 code active?

Driving with the P2156 code is not recommended, as it can lead to poor engine performance and potential engine damage if not addressed promptly.

How is the P2156 code diagnosed?

A mechanic will use a scan tool to confirm the code, inspect the injector wiring and connectors, test the injector itself, and check the PCM for proper function.

What tools are needed to fix the P2156 code?

Tools may include a digital multimeter, a scan tool, and basic hand tools to inspect and repair wiring or replace the injector.

How can I fix the P2156 code on my Dodge?

Repairs may involve repairing or replacing damaged wiring, cleaning or replacing the injector, or in some cases, replacing the PCM if it's faulty.

What should I check first if my Dodge shows the P2156 code?

Start by inspecting the wiring and connectors for Cylinder 4's injector for any signs of damage, corrosion, or loose connections.

How much does it cost to repair the P2156 code?

Repair costs vary depending on the issue, ranging from $100 for minor wiring repairs to $500 or more for injector or PCM replacement.

Can the P2156 code be caused by a bad PCM?

Yes, a faulty PCM or injector driver circuit can cause the P2156 code, but this is less common and typically diagnosed after ruling out other issues.

Discuss the causes and fixes for P2156 Dodge OBDII Code

Code P2156 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play